Autonics BEN5M-MFR Photoelectric Sensor
₹2,650.00
(GST 18% Exclusive)
280867
Autonics BEN5M-MFR Photoelectric Sensor with built-in amplifiers are available in universal AC/DC types and DC types. Light ON/Dark ON operation mode switch and sensitivity adjusters are available for easy configuration and set up (except through-beam types). The specialized sensor IC provides high performance in various user applications.
Autonics BEN5M-MFR Photoelectric Sensor sensing the distance is specified with using the MS-2 reflector and the same as the MS-4 reflector. Sensing distance is the setting range of the reflector. The sensor can detect under 0.1m. When using reflective tapes, the reflectivity will vary by the size of the tape. Please refer to the “Reflectivity By Reflective Tape Model” table before using the tapes. The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
Features of Autonics BEN5M-MFR Photoelectric Sensor:
● Small and power supply built-in type.
● Easy installation with LED indicators on product.
● Light ON/Dark ON operation mode switch.
● Status and output LED indication.
● Built-in IC photo diode for disturbing light and electrical noise.
Additional information
| Manufacturer | Autonics |
|---|---|
| Model No | BEN5M-MFR Photoelectric Sensor |
| Measuring Parameters | Retroreflective (standard type) |
| Sensing Distance | 5m*1 |
| Sensing Target | Opaque materials of Min. Ø60mm |
| Response Time | Max. 20ms |
| Power Supply | 24-240VACᜠ ±10% 50/60Hz, 24-240VDCᜡ ±10% (ripple P-P: max. 10%) |
| Current consumption | Max. 4VA |
| Light source | Infrared LED (850nm) |
| Operation Mode | Light ON/Dark ON operation mode switch |
| Control Output | Relay contact output (relay contact capacity: 30VDCᜡ 3A of resistive load, 250VACᜠ 3A resistive load, relay contact composition: 1c) |
| Relays | Mechanically: min. 50,000,000 operation, electrically: min. 100,000 operation |
| Indication | Operation indicator: red LED, Stability indicator: green LED |
| Insulation Resistance | Over 20MΩ (at 500VDC megger) |
| Insulation Type | Double or strong insulation |
| Noise Immunity | ±1,000V the square wave noise (pulse width: 1㎲) by the noise simulator |
| Dielectric Strength | 1000VAC 50/60Hz for 1minute |
| Housing Material | IP50 |
| Material | Heat resistant acrylonitrile butadiene styrene |
| Supply Scope | I unit of Photoelectric Sensor Adjuster driver, fixing bracket, bolts, nuts |
| Weight | Approx. 208g |
