Fluke i1010 AC/DC Current Clamp

The Fluke i1010 AC/DC current clamp is highly reliable, measures 1A to 1000A and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas.


Tax /GST included

Fluke current clamps extend the current ranges of Fluke tools.Compatible with most Fluke multimeters.

General Specification:

Measurement type

Hall sensor

Nominal current range

600 A, AC 1000 A, DC

Continuous current range

 A - 600 A, AC 1 A - 1000 A, DC

Maximum non-destructive current

400 A

Lowest measureable current

0.5 A

Basic accuracy

2% + 0.5 A (% reading + floorspec)

Useable frequency

DC - 10 kHz

Output level(s)

1 mV/A

Zero error adjustmemt


50 Items

Data sheet

Fluke i1010
Battery Life
9 V, 60 h
CAT III, 600 V
Maximum conductor diameter
30 mm 2 x 25 mm
Maximum voltage
600 V
Output cable length
1.6 m
Shrouded banana plugs

You might also like