GE Telaire CO2 Transmitter

The new Telaire T5100 series is a new low cost, high performing CO2 transmitter for the  building controls market. It works seamlessly with building automation systems, and allows you to simply and effectively control fresh air  Demand-controlled ventilation using  CO2  sensors prevents energy losses from over-ventilation while maintaining indoor air quality.


175,37 $US


  • Patented, Absorption Infrared Gas sensing engine provides high accuracy in a compact low cost package.

  • Mounting plate with two-piece terminal blocks provide quick, easy wiring.

  • Gas permeable, water resistant  CO2  diffusion filter prevents particulate and water contamination of the sensor.

  • Locking screw secures cover and sensor to the mounting bracket for tamper  resistance.

  • Modern enclosure

  • Reliable (20 years of low-cost infrared sensor manufacturing)


29 Produits

Fiche technique

Telaire by GE (General Electric)
vacuum measuring range
0 to 2000 ppm
± 30 ppm or 3% of the reading shown,whichever is higher*
0 to 5 V, or 0 to 10 V jumper selectable (100 OHMS output impedance) Or 4 to 20 mA (RL maximum 500 Ohms)
Signal Update
Every 5 seconds
Operating Range
32°F to 122°F (0°C to 50°C)
Temperature Dependance
0.2% FS per °C (±0.11% per °F)
Storage Conditions
-40°F to 158°F (-40°C to 70°C)
Sensing Method
Non-dispersive infrared (NDIR) absorption gold plated optics Patented ABC Logic self Calibration algorithm
Power Supply
18-30 VAC RMS, 50/60 Hz, or 18 to 42 VDC, polarity protected
Power Consumption
Typical 0.7 W at normal voltage of 24V AC RMS
Flammability Classification
UL94 5VA
24 months manufacturing warranty

Vous aimerez aussi