Masibus ICAL LC12 Analog Signal Generator
₹53,661.00
(GST 18% Exclusive)
279837
Masibus ICAL LC12 Analog Signal Generator is an ultimate loop calibrator used for sourcing, measuring, and simulating Loop current, mV, and V. It is a compact, rugged, and easy-to-use hand-held device with a graphical user interface. This LC 12 Signal Generator has simultaneous source and sense capability with independent parameter and range selection for source and sense. Masibus LC 12 Loop Calibrator is designed to provide a base accuracy of 0.02% reading in all modes of operation. This LC 12 Signal Generator comes with a Mini USB connector for charging, logged data retrieval, and firmware upgrade.
Applications: Calibration Lab, Process plant, Dairy plant, Cement Industries, Chemical Industries, Paper Industries, Engineering laboratories, Electronics Industries, etc.
Products related to this item
-
₹95,145.00(GST 18% Exclusive)
Fluke 754 Process Calibrator
-
₹18,290.00(GST 18% Exclusive)
ABB-V18311H-1829101 I/P Signal Converter
-
₹16,100.00(GST 18% Exclusive)
ABB I/P Electronic Signal Converter
-
₹34,337.00(GST 18% Exclusive)
BTH C9 Universal Process Calibrator
Masibus ICAL LC12 Analog Signal Generator has been designed to give maximum Battery life on a full charge, the backlight is adjustable for power saving and the display can be programmed to switch off when not in use automatically. There is an Automatic Step/ Ramp output with Auto/ Man selection, data logging, Max/ Min/Average values, Scaling to Engineering units, and filter settings that enhance the use of LC 12 making it multifunctional. This Analog Signal Generator has an Automatic Switch test feature.
Features of Masibus ICAL LC12 Analog Signal Generator:
- Easy-to-read Color Graphical TFT LCD display
- Available with EMI/EMC compliance
- Rechargeable lithium-ion battery with enhanced power control for prolonged battery life
- Simultaneously Measure and Source: mA, mV, and V with dual readings on the display
- 24 VDC loop Power Supply to power transmitters and loops
- 2W simulation and Read/ Power mode for in-situ Loop checking and calibration
- Step/ Ramp functions with Auto/ Man selection
- Switch test with condition (open/closed) indicator
- Universal Serial Bus (USB) communication port for charging, data retrieval, and firmware upgrade
- Data logging to measure long-time drift
- Other Features: Max/Min/Average, filter settings, tare facility, adjustable backlight, alarm annunciation (on display and buzzer), automatic display off.
| Measurement Range | |||
| Parameter | Range | Resolution | Accuracy |
| mV | 0-250.00 mV | 0.01 mV | +0.02% of reading + 2 counts |
| V | 0-30.000 VDC | 0.001 V | +0.02% of reading + 2 counts |
| mA | 0-24.000 mA | 0.001 mA | +0.02% of reading + 2 counts |
| Source Range | |||
| Parameter | Range | Resolution | Accuracy |
| mV | 0-250.00 mV | 0.01 mV | +0.02% of reading + 2 counts |
| V | 0-12.000 VDC | 0.001 V | +0.02% of reading + 2 counts |
| mA | 0-24.000 mA | 0.001 mA | +0.02% of reading + 2 counts |
Additional information
| Manufacturer | Masibus |
|---|---|
| Model No | ICAL LC12 |
| Measuring Parameters | V, mA, mV |
| Display | 2.4” TFT LCD, 262K Color, Graphical, 42.72 mm x 60.26 mm, 240×320 pixels, White LED Backlight |
| Input Voltage | 30 VDC |
| Input Impedance | V, mV >1MΩ |
| Response Time | Input <100ms, Output <100ms |
| Load impedance | >10 KΩ for mV/V, <750 Ω for mA |
| Display update rate | 10 readings / sec |
| Datalogging | In internal memory periodic logging: 150000 readings max |
| Communication | USB 2.0 |
| Battery | Rechargeable Li-ion battery pack, 2300mAh 3.7V |
| Charging Time | <5 hours max |
| Housing | ABS Plastic |
| Protection class | IP 20 |
| Dimensions | 161.7 (L) x 82.1 (W) x 39.5 (H) |
| Weight | <300 grams |
DS_Masibus ICAL LC12 Analog Signal Generator_Ver1.0
Reviews
There are no reviews yet.