Meco DIT-99C Digital Insulation Tester
₹1,889.41
(GST 18% Exclusive)
3960
(However please contact store for precise delivery schedule. Backorder also allowed)
The protection obstruction (IR) test (additionally usually known as a Megger) is a spot protection test which utilizes a connected DC voltage (commonly either 250Vdc, 500Vdc or 1,000Vdc for low voltage hardware <600V and 2,500Vdc and 5,000Vdc for high voltage gear) to gauge protection opposition in either kΩ, MΩ or Gω.
Applications: Insulation Resistance Measurement of Electrical Equipment like Motors, Transformers, Machines, etc., Electrical Cables for Distribution Networks, for Communication Networks, House Hold Appliances (Washing Machines, Mixer, Toaster, etc.), Industrial, Commercial and Residential Installations.
Meco DIT-99C Digital Insulation Tester is the insulation resistant measurement device. The protection obstruction (IR) test (additionally usually known as a Megger) is a spot protection test which utilizes a connected DC voltage (commonly either 250Vdc, 500Vdc or 1,000Vdc for low voltage hardware <600V and 2,500Vdc and 5,000Vdc for high voltage gear) to gauge protection opposition in either kΩ, MΩ or Gω. The deliberate opposition is expected to show the state of the protection or dielectric between two conductive parts, where the higher the obstruction, the better the state of the protection. In a perfect world, the protection obstruction would be vast, yet as no encasings are flawless, spillage streams through the dielectric will guarantee that a limited (however high) opposition esteem is estimated.
Features:
- 17mm LCD Display and 3½ Digit
- Single Person Push Button Operation
- High Accuracy ± (3% rdg + 2 dgt)
- Designed to Generally Confirm to IS 10656-1983
- Meets Requirement of IEC 61010, Installation Category II, 1000V Phase – Earth
- Terminal Voltage more than 85% of rated Voltage for Insulation Resistance Measurement.
- Five Models with various Voltage & MOhm Ranges
- Carry anywhere as it is portable
Additional information
Weight | 1 kg |
---|---|
Manufacturer | MECO |
Model No | DIT-99C |
Measuring Parameters | DC Voltage, Resistance |
Insulation Test Voltage | 500 V DC |
Insulation Resistance Test Range | 0 to 200 MOhm |
Insulation Resistance Accuracy | +/-(3%rdg+2dgt) |
Short Circuit Current | Less than 2mA. |
Operating Temperature | 0°C to +50°C |
Storage Temperature | -20 ℃ to 60℃ |
Relative Humidity | 75% RH |
Accessories | Instruction Manual, Carrying Case. |
Power | 9V (6*1.5V AA) |
Display | 3½ Digit LCD Display with 1999 Counts. |
Dimensions | 145 x 95 x 59 mm |
Weight | 370 Grams including Battery |
Reviews
There are no reviews yet.