MECO MC 907 Analog Insulation Tester
₹2,709.00
(GST 18% Exclusive)
287415
MECO MC 907 Analog Insulation Tester is a Portable insulation resistance testers designed to help prevent hazards such as electric shock and short-circuits caused in electrical devices, parts, and equipment which is used in industrial plants, buildings, and other settings degrades over long periods of use. This Meco Insulating Tester helps to measure resistance with high accuracy. Handheld insulation device has an 80-millimeter scale length and is housed in a durable ABS resin yellow case with an acrylic meter cover.
Applications: Tester Tool for Electricians, Electricians, labs, maintenance technicians, and engineers, Motors and Generators
Products related to this item
-
₹6,491.53(GST 18% Exclusive)
Waco WI-1002( 5 KV) Insulation Tester
-
₹19,753.66(GST 18% Exclusive)
Metravi MC 38D Digital Motor Checker
-
₹41,440.00(GST 18% Exclusive)
CEM DT-9989 Multimeter with oscillometer
-
₹56,059.74(GST 18% Exclusive)
Amprobe AMB-50 Basic Insulation Resistance Tester
MECO MC 907 Analog Insulation Tester which helps to measures high resistance values, with a range starting from 0 to 500Ohms and allowing users to measure insulation resistance up to 500 mΩ or 1000 volts. This Portable Insulation Tester comes equipped with two probes and a press-connect button system. A test button is included to verify readings. This device is commonly used to check the resistance in cables and generators, ensuring there are no breaks and maintaining continuity.
Features MECO Analog Insulation Tester
- Single-person push button operation
- High accuracy of 5% of the indicated value within the effective range
- Complies with IEC1010, Installation Category II, 1000V Phase to Earth
- It comes with the testing button which allows to check the readings.
Additional information
| Manufacturer | MECO |
|---|---|
| Model No | MC 907 |
| Measuring Parameters | Insulation Resistance |
| Measuring Range | 0-500Ohms |
| Accuracy | 5%of Indicated Value at 27 C 5 C |
| Operating Temperature | 0 to 50 °C |
| Relative Humidity | 80% Maximum |
| Insulation Resistance Test Range | More than 50M ohm at 500v between circuit & case |
| Power | 9V (6×1.5V AA) Battery |
| Battery | 9V (6 x 1.5V AA) Battery |
| Low Battery | When battery voltage drops below operating voltage, pointer connot reach zero after shorting the output terminal |
| Dielectric Strength | 3.5KV @ 50Hz for 1min between input terminal & case |
| Standard Accessories | Standard accessories carrying case, 1.5V AA batteries, Battery adaptor, (which is optional) |
| Dimensions | 144.5×95×72.5 mm |
| Weight | 438.6g |
DS_MECO MC 907 Analog Insulation Tester_Ver1.0