MSR MC2 H2S Gas Sensor Transmitter
267658
MSR MC2 H2S Gas Sensor Transmitter houses a module with µController, analog output and power supply in addition to the electrochemical sensor element including amplifier. The µController calculates a linear 4 – 20 mA (or 2 – 10 V) signal out of the measurement signal and also stores all relevant measured values and data of the sensor element.
Applications:
The µGard®2 Sensor MC2 is used for the detection of toxic gases or for oxygen monitoring wherever a typical 4 – 20 mA (or 2 – 10 V) signal is required.
MSR MC2 H2S Gas Sensor Transmitter conatins exchangeable sensor unit including digital value processing, temperature compensation and self control for the continuous monitoring of the ambient air.
Calibration is done either by simply replacing the sensor unit or by using the comfortable, integrated calibration routine directly at the system.
Features:
- Digital measurement value processing incl. temperature compensation
- Internal function control with integrated hardware watchdog
- High accuracy, selectivity and reliability
- Low zero point drift
- Long sensor life time
- Hardware & software according to SIL2 compliant development process
- Easy maintenance and calibration by exchange of the sensor unit or by comfortable on-site calibration
- 4 – 20 mA (or 2 – 10 V) analog output with selectable signal output for special mode, fault etc.
- Reverse polarity protected, overload and short-circuit proof
- Housing for integration of the sensor unit
- IP 65 version
Additional information
| Weight | 1 kg |
|---|---|
| Make | MSR |
| Gas Type | H2S |
| Sensor Element | Electrochemical |
| Pressure Range | Atmospheric ± 20 % |
| Storage Temperature | 5 °C to 30 °C (41 °F to 86 °F) |
| Storage Time | 6 months |
| Protection class | IP 65 |
| Mounting | Wall Mounting |
| Wire Connection | Screw-type terminal |
| Switching capacity | 24 V DC / 50 mA (+ switching) |
| Dimensions | 94 x 130 x 57 mm (W x H x D) |
Reviews
There are no reviews yet.