Optical Sensor
Jumo Optical Sensor
Optical Sensor for Dissolved Oxygen
Optical Sensor

JUMO Optical Sensor for Dissolved Oxygen

Jumo ecoLine O-DO is an optical sensor for dissolved oxygen for measuring dissolved oxygen in aqueous solutions.

Applications: ETP Aeration, sewage treatment, drinking water control, fish farms and similar.


Tax /GST included

JUMO ecoLine O-DO - optical sensor for dissolved oxygen (DO) serves as an addition to existing JUMO systems by providing the DO concentration measurement feature. It is based on the visual measurement procedure (luminescence method). The device is durable, made out of stainless steel, is robust, with almost no need for maintenance. It can store the calibration data, making it ideal for dynamic measuring environments, such as sewage treatment, drinking water control, fish farms and similar. It operates across a measuring range from 0 to 20 mg/l and temperatures up to 60 °C

100 Items

Data sheet

Type 202613
Measuring Range
0.00 to 20.00 mg/l 0.00 to 20.00 ppm 0 to 200 % SAT
±0.1 mg/l ±0.1 ppm ±1 % SAT
Current consumption
Standby: 25 μA RS485 on average: 4.4 mA (at 1 measurement/s) Current pulse (starting current peak): 100 mA
Response Time
t90 < 60 s
Dissolved oxygen Temperature
Material of construction
Sensor shaft and membrane cap: stainless steel 316L Cable bushing: polyamide Membrane: silicone
Measuring principle
Optical measurement according to the principle of luminescence quenching
DC 5 to 12 V
Cable Length
Max. 30 m
Signal Interfernce
RS485 interface with Modbus RTU protocol
Luminophore operating life (DO Disk)
Approx. 2 years depending on the sampling rate of the display unit
Temperature compensation
Via integrated NTC, in the range from 0 to +40 °C
Air pressure compensation
500 to 1100 hPa (entered on display unit/controller)
Salinity compensation
0 to 60 g/kg (entered on display unit/controller)
Max. sampling rate for measured values
1 Hz
25 mm × 146 mm
827 g (sensor including 10 m cable) 1,984 g (sensor including 30 m cable)

You might also like