Fluke 754 Process Calibrator

The Fluke 754 offers the ability to maintain and calibrate selected HART transmitters without a second tool.Process plants have taken advantage of smart transmitters, the need for a new generation of calibrators has emerged—calibrators that can communicate via industry standard digital protocols.

Quantity

$11,930.73
Tax /GST included

The 754 combines HART communication capability in a documenting process calibrator to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART instrumentation.

The 754 offers:

• Integrated HART communication functions,permitting you to monitor, control, and calibrate HART instrumentation.
• Handling of fast pulsed RTD transmitters and PLCs,with pulses as short as 1 mS.
• Li-ion battery with 4400 mA hour life and gas gauge.

 

Technical Specifications:

Manufacturer

Fluke

Model

Fluke-754

Voltage DC

                             1 Year                                        2 Years

100.000 mV       0.02%+0.005 mV                    0.03%+0.005 mV

3.00000              0.02%+0.00005 V                   0.03%+0.00005 V

30.0000 V           0.02%+0.0005 V                     0.03%+0.0005 V

300.00 V             0.05%+0.05 V                          0.07%+0.05 V

Voltage AC

Range 

40 to 500 Hz     

 Resolution

         1 Year

                         2 Years 

3.000 V                0.001 V              0.5%+0.002                1.0%+0.004 V

30.00 V                0.01 V                0.5%+0.02 V               1.0%+0.04 V

300.0 V                 0.1 V                 0.5%+0.2 V                  1.0%+0.2 V

Current DC

                           1 Year                            2 Years                                                       30.000 mA          0.01% + 5 uA  0.015%+7 uA

110.00 mA          0.01% + 20 uA 0.015%+30 uA

Data Log Functions

Measure functions:

 Voltage, current, resistance, frequency, temperature, pressure

Reading rate:

 1, 2, 5, 10, 20, 30, or 60 readings/minute

Maximum record length:

 8000 readings (7980 for 30 or 60 readings/minute

 

Ramp Functions

Source functions:

 Voltage, current, resistance, frequency, temperature

Rate:

 4 steps/second

Trip detect:

 Continuity or voltage (continuity detection not available when sourcing current)

 

Loop Power Function

Voltage:

 Selectable, 26 V

Accuracy:

 10%, 18 V minimum at 22 mA

Maximum current:

 25 mA, short circuit protected

Maximum input voltage:

 50 V DC

 

Step Functions

Source Functions

 Voltage, current, resistance, frequency, temperature

Manual Step

 Selectable step, change with arrow buttons

Autostep

 Fully programmable for function, start delay, stepvalue, time per step, repeat

 

Operating Temperature

 -10 °C to +50 °C

Storage Temperature

-20 °C to +60 °C

Dust/water resistance

Meets IP52, IEC 529

Size

136 x 245 x 63 mm (5.4“ x 9.6 x 2.5)

Batteries

Internal Battery Pack Li-ion: 7.2V, 4400mAh, 30 Wh

Data storage capacity

1 week of calibration procedures results

Weight

 1.2 kg (2.7 lb)

50 Items

Data sheet

Model
Fluke 754 Series
Operating Temperature
-10 °C to 50 °C
Operating Altitude
3000 m above mean sea level
Record Capacity
8000 readings
Data Storage Capacity
1 week of calibration procedures and result
Battery Life
Typical usage, >8 hours
Protection class
IP-52
Make
Fluke
Dimensions
136mm x 245mm x 63 mm

You might also like