ATI Q45D Dissolved Oxygen Transmitter
₹39,677.97
(GST 18% Exclusive)
3874
ATI Q45D Dissolved Oxygen Transmitter perfectly suits applications requiring a basic 2-wire transmitter or battery-worked instrument. This ATI dissolved oxygen transmitter is adaptable to either optical or galvanic D.O sensors, this unit is perfect for Installation where just simple signs are required and low power operation is preferred.
Applications: Aeration Systems Fish Farming, Wastewater Effluent, Water Distribution, Fish Farming, Rivers, Streams and so on.
ATI Q45D Dissolved Oxygen Transmitter‘s optical component is intended to last at least 2-years in the ordinary tasks, except if mechanical harm occurs. Optical sensors don’t require stream over the detecting component so exact estimations can be made all the more precisely in frameworks with low streams.
Features of ATI Q45D Dissolved Oxygen Transmitter:
- Circle controlled or battery-worked
- External 5-17 VDC variant for sun based power applications
- Adapts to Optical or Galvanic sensors
- Submersion or flow cell sensor alternatives
- Simple air-adjustment
- Large, simple to-peruse LCD show
- Display D.O. in ppm, mg/l, or % immersion
- Clear menu-driven UI
- NEMA 4X (IP-66) fenced-in area
- Wall or pipe mounting section
- Built-in PID controller
Additional information
| Weight | 1 kg |
|---|---|
| Manufacturer | ATI |
| Model No | Q45D |
| Measuring Parameters | Dissolved Oxygen |
| Range | 0 to 40.00 ppm OR 0 to 40.00 mg/l OR 0 to 200.0 Percent saturation |
| Accuracy | Greater of 0.3% of value or 0.02 ppm |
| Sensor Type | Optical or Galvanic membraned |
| Input | Pt100 RTD in sensor for temperature compensation |
| Analog Output | 2-Wire unit: Single 4-20 mA DC, 450 ohms maximum Battery unit: Two 0-2.5 VDC, 50K ohms minimum External DC: Two 0-2.5 VDC, 50K ohms minimum |
| Drift | 0.1%/°C |
| Isolation | 600 V Galvanic isolation |
| Linearity | 0.1% |
| Power | 2- Wire unit: 17-30 VDC, 25 mA maximum Battery unit: Two AA Alkaline batteries External DC: 5-17 VDC, 10 mA maximum |
| Mounting | Wall or pipe mounting bracket supplied |
| Repeatability | 0.02 ppm |
| Sensitivity | 0.01 ppm |
| Enclosure | NEMA 4X (IP-66) Polycarbanate, V-0 flammability |
| Ambient Temperature | Operating: -40° to + 60°C Storage: -40° to + 70°C |
| Ambient Humidity | 0-95%, Non-condensing |
| Certifications | CE marked to BS EN 61326-1:2006 Standard UL and CSA General Purpose |
| Dimensions | 111 X 111 X 90 mm |
| Weight | 540 Grams |
Reviews
There are no reviews yet.