SCOTT Safety Protege ZM H2S Single Gas Monitor
₹34,301.27
(GST 18% Exclusive)
4033
SCOTT Safety Protege ZM H2S Single Gas Monitor a simple to-utilize, zero-support gas detection solution that conveys high performance in a small, ergonomically planned bundle. It is accessible in oxygen(O2), carbon monoxide (CO) and hydrogen sulfide (H2S) single gas models.
Products related to this item
-
₹19,140.00(GST 18% Exclusive)
Honeywell BW Solo Oxygen Gas Detector
-
₹58,296.19(GST 18% Exclusive)
Drager Pac 6500 Portable SO2 Gas Detector
SCOTT Safety Protege ZM H2S Single-Gas Detector comes with few Customisable Settings as below:
- Multiple LCD display options including real-time gas readings monitor life remaining or both.
- Three point alarms (audible, visual and tactile).
- User configurable bump and calibration reminders.
- Data-logging capabilities.
- Custom or factory programmed alarm set points.
- Use hibernate mode on the CO and H2S models for up to one year additional operating life.
Additional information
| Weight | 1 kg |
|---|---|
| Manufacturer | Scott |
| Model No | Protege ZM |
| Target Gases | Hydrogen Sulfide (H2S) |
| Measurable Range | 0 to 100 ppm |
| Resolution | 1 ppm |
| Display | Liquid Crystal Display (LCD) |
| Battery | Lithium Ion battery |
| Battery Life | 2+ Years |
| Alarms | • Visual Alarm 3 Red LED Bars • Audible Alarm rated at 95dB @ 15cm • Vibrating Alarm High vibrating tactile alarm |
| Operating Temperature | -10°C to 50°C |
| Operating Humidity | 5 to 95% RH Non-condensing |
| Power Source | Lithium Ion battery |
| Datalogging | Logs last 25 events |
| Data Retention | Backup to PC |
| Case Material | Impact absorbent rubber over mould |
| IP Rating | IP 66/67 |
| Approval | IECEx Ex ia IIC T4 Ga |
| Dimensions | 940 X 560 X 330 mm |
| Weight | 77 Grams |
