Sentek SD218 Photoelectric Smoke Detector
271607
Sentek SD218 Photoelectric Smoke Detector is to be mounted on the ceiling or on the wall if necessary. Since the SD-218 series smoke detector is a single-station type, it cannot be linked to other detectors. Model SD-218 series with I mark can serve as a single-station, stand-alone unit, or can be interconnected with other SD-218 series with I mark detectors.
Applications: Hospitals, Commercial Buildings, Industries, etc.
Sentek SD218 Photoelectric Smoke Detector is to be mounted on the ceiling or on the wall if necessary. Since the SD-218 series smoke detector is a single-station type, it cannot be linked to other detectors. Model SD-218 series with I mark can serve as a single-station, stand-alone unit, or can be interconnected with other SD-218 series with I mark detectors. It is designed in accordance with EN14604 and manufactured under the best quality control. The SD-218H series alarm also acts as a smoke sensor and a 135°F heat detector at the same location.
Features of Sentek SD218 Photoelectric Smoke Detector:
• Photoelectric sensing technology
• Low-sensitivity warning
• Low-battery warning
• Battery case at the back of a detector for easy removal of a battery
• SMD circuit board design-satisfactory quality and reliability guaranteed
• Test button verifies battery and alarm operation
• Sounding a loud alarm signal exceeding 85db in alarm mode
Additional information
| Weight | 1 kg |
|---|---|
| Manufacturer | Sentek |
| Model | SD218 |
| Smoke Sensitivity | 0.08 to 0.14dB/m |
| Battery Availability | 18months(Carbon Zinc), 3 years(Alkaline), 10 years(Lithium). |
| Standby Current | 8µA |
| Alarm Current | 15mA |
| Operating Temperature | 0 to 50°C |
| Operating Humidity | 0 to 95% RH, no condensation or icing |
| Alarm Sound Level | 85 db/3m |
| Dimensions | 102 x 35mm with base |
| Weight | 130 Grams |
