• 9,966.0048,059.00

    Siemens QBM2030 30 Differential Pressure Sensor

    Brand:Siemens

    Siemens QBM2030 30 Differential Pressure Sensor is used to measure the slightest differential pressure variation in ventilation and air conditioning ducts. This Siemens Pressure Sensor also Monitors filters and control fans with output available in the device. The siemens Pressure Sensor acquires differential, over and under the pressure of air and nonaggressive gases.

    Applications: This pressure sensor is widely used in HVAC applications for measuring the difference between positive and negative pressure. Measuring the smallest differential weights in ventilation and cooling channels, Pharmaceutical Clean Rooms, and AHU applications Check wind streams, Monitor channels, and control fans

     

  • 4,410.0010,920.00

    Siemens QFM21 Series Temperature Humidity Duct Sensor

    Brand:Siemens

    Siemens QFM21 Series Temperature Humidity Duct Sensor can be utilized for all systems or appliances capable of obtaining and handling the sensor’s 0 to 10 Vdc, 4 to 20 mA, or passive resistance output signals.

    Applications: Control sensors in supply or return air ducts, Reference sensors, Industrial, Commercial and General Buildings.

  • 17,100.00

    Siemens QFM3171 Temperature-Humidity Duct Sensor

    Brand:Siemens

    Siemens QFM3171 Temperature and humidity duct sensor can be use in ventilation and air conditioning plants where high accuracy and short response times for measuring relative humidity are required. The measuring range covers the entire humidity range of 0…100 %.

    Applications: Storage and production facilities in the paper, textile, pharmaceutical, food, chemical and electronics industry, Laboratories, Hospitals, Computer and EDP centers Indoor swimming pools, Greenhouses etc.

  • Siemens TH100 Head Mounted Temperature Transmitter

    Brand:Siemens

    Siemens TH100 Head Mounted Temperature Transmitter is an economical device used for Pt100 measurements in all industries. This Siemens Head Mounted Temperature Transmitter has a compact size and can be installed in connection heads of type B or larger. The output signal is a load-independent direct current of 4 to 20 mA which is proportional to the temperature. For the parameterization, the SIPROM T software is used in combination with the modem for SITRANS TH100. Its compact design makes this Temperature Transmitter suitable for retrofitting measuring points or replacing analog transmitters. The transmitter is available in a non-Ex version and in a version that is suitable for use in hazardous areas.
    Applications: Refining, petrochemical, power, and energy industries.