Fluke i1010 AC/DC Current Clamp
Roll over image to zoom in
₹47,116.00
(GST 18% Exclusive)
3598
Fluke i1010 AC/DC current clamps can measure from 1Amps. to 1000Amps. to give exact current perusing without breaking the circuit. This brace estimates both AC/DC current with an expansive jaw, battery-fueled Hall-impact test that offers access to hard to achieve zones.
Products related to this item
-
₹2,338.72(GST 18% Exclusive)
Mextech DT-2250 Digital AC Clamp Meter
-
₹2,275.00(GST 18% Exclusive)
Meco 72T-Auto Digital AC Clamp Meter
-
₹21,902.54(GST 18% Exclusive)
Fluke 373 True-RMS AC Clamp Meter
-
₹29,807.00(GST 18% Exclusive)
Fluke 319 TRMS Clamp Meter
Fluke i1010 AC/DC current clamp is a battery-controlled Hall-impact test that expands the current ranges of Fluke instruments
Features:
- On/off LED indicator.
- Safety rating: CAT III 600 VRMS.
- It provides accurate current reading without breaking the circuit.
- Compatible with most Fluke multimeters.
Additional information
| Weight | 1 kg |
|---|---|
| Manufacturer | Fluke |
| Model No | i1010 |
| Measuring Parameters | AC Current, DC current A |
| Sensor Type | Hall sensor |
| Nominal AC Current | 600 A, AC |
| Nominal DC Current | 1000 A, DC |
| Continuous AC Current | 1 A to 600 A |
| Continuous DC Current | 1 A to 1000 A |
| Highest Current | 1000 A |
| Lowest Measurable Current | 0.5 A |
| Accuracy | 2% + 0.5 A |
| Usable Frequency | DC – 10 kHz |
| Output Level | 1 mV/A |
| Zero Error Adjustment | Yes |
| Maximum voltage | 600 V |
| Battery Life | 9 V, 60 h |
| Safety | CAT III, 600 V |
| Shrouded banana plugs | Yes |
| Maximum conductor diameter | 30 mm 2 x 25 mm |
| Output cable length | 1.6 m |
| Warranty | 1 Year Manufacturer Warranty |
| Dimensions | 209 X 78 X 48 mm |
| Weight | 900 Grams |
DS_Fluke-I410,I1010 Clamp Meter_Ver1.0
Reviews
There are no reviews yet.