• Siemens RWD62 Universal Controller

    Siemens RWD62 Universal controllers are designed for heating, ventilation, air conditioning, and cooling in comfort control plants. It can be mounted on canals, walls, and in-plant rooms in a control panel or in the ARG62.21 / ARG62.22 housing. Measurement and control of temperature, relative humidity, absolute humidity, enthalpy, differential pressure, volumetric airflow, and indoor air quality.

    Applications : HVAC & R-Systems

  • 37,248.00

    Siemens SKD62 Electrohydraulic Actuator

    Brand:Siemens

    Siemens SKD62 Electrohydraulic Actuator has features of compact design and can be customized to fit specific application requirements. It is also equipped with advanced control electronics that allow for precise positioning and feedback. The actuator is designed to withstand harsh environments and can operate in temperatures ranging from -40°C to 80°C.

    Applications: Aerospace and defense, Oil and gas industry, Power Generation, Manufacturing, Construction.

     

  • 8,110.179,240.00

    Siemens® QBM2030 5 Differential Pressure Sensor

    Siemens QBM2030-5 Differential Pressure Sensor is used to measure the slightest differential pressures variation in ventilation and air conditioning ducts, also Monitoring filters and control fans with output available in the device. The siemens pressure sensor acquires differential, over and under the pressure of air and nonaggressive gases.

    Applications: This pressure sensor is widely used in HVAC applications for measuring the difference between positive and negative pressure. Measuring the smallest differential weights in ventilation and cooling channels, Pharmaceutical Clean Rooms, and AHU applications Check wind streams, Monitor channels, and control fans

  • 12,366.00

    Siemens® QFA 2071 Temperature and Humidity Room Sensor

    Siemens® QFA 2071 Temperature and Humidity Room Sensor is used for continious monitoring of critical parameters like Temperature, Relative Humindity in air conditioning, and ventilating plants. This Room sensor can also be used as a control sensor and measuring sensor for building automation and control systems or indicating units.
    Applications: HVAC, IT Companies, Commercial Buildings, etc.

  • 9,809.32

    Siemens® QFM2100 Duct Sensor

    Siemens® QFM2100 Duct Sensor acquires the relative humidity in the air duct via its capacitive humidity sensing element whose electrical capacitance changes as a function of the relative humidity. This sensor acquires the temperature in the air duct via its sensing element whose electrical resistance changes as a function of the temperature.

     

  • 10,858.0052,350.00

    Siemens® QFM2171 Duct Sensor

    Siemens® QFM2171 Duct Sensor transmits changes in humidity and temperature to the building control systems. These sensors are mainly suitable for applications where precise, stable humidity sensing is required.
    Applications: Air Ducts, HVAC Systems, etc.

  • 16,875.00

    Stek NS10LT Infrared Thermometer 

    Stek NS10LT Infrared Thermometer measures the temperature of surfaces in hazardous areas without contact and provides a direct 0-5v output. It is certified to standards. the electronic driver of the sensor to gain an appropriate sensitivity range for the required operation.

    Applications: Radiation transmitted, Gas Analyzers flame monitor,Obtacles Detection, industrial safety devices

  • 2,450.00

    Subzero SZ-7524P Digital Temperature Controller

    Brand:Subzero

    Subzero SZ-7524P Digital Temperature Controller is an aesthetically superior version of their predecessors. The SZ 7515/25-P is a single setpoint controller with a buzzer.
    Applications: Temperature & process indication, Plastics molding/extrusion temperature monitoring, Heat treatment – furnace temperature monitoring, Chillers, Water heating boilers, Oven Control, Pressure/ Level/ Flow Monitoring.

  • 2,200.00

    Subzero SZ7515P Digital Temperature Controller

    Brand:Subzero

    Subzero SZ7515P Digital Temperature Controller is an aesthetically superior versions of their predecessors. SZ 7515/25-P is a single setpoint controller with a buzzer. SZ 7520/25-P is a defrost controller and 7529-Pis also a defrost controller with an inbuilt power relay which can drive compressor loads directly up to 20Amps, thereby eliminates contactors in single-phase applications. They are specifically designed for refrigeration applications wherein the compressor cuts off at a set point and is restarted at a temperature of setpoint plus differential.

    Applications: Chiller Machines, Lab Equipments, Display Cabinets.

  • Supco SL500 Temperature and Humidity Data Logger

    Brand:Supco

    Supco SL500 Temperature and Humidity Data Logger is a small, lightweight, and easy-to-use device that records temperature and humidity data over time. It is ideal for monitoring temperature and humidity in various environments, such as warehouses, factories, and greenhouses. The data logger can be programmed to record data at intervals of 1 second to 9 hours. The data is stored in non-volatile memory, so it will not be lost even if the battery fails. The data can be downloaded to a computer using the included software.

    Applications: Warehouses, Greenhouses, Factories.

  • 18,645.00

    Supco VG64 Digital Vacuum Gauge

    Brand:Supco

    Supco VG64 Digital Vacuum Gauge is a dual-port, high resolution, quick reaction with a convenient built-in hanger that helps to measure vacuum in seven international units and provides fast accurate measurements.
    Applications: vacuum measurement during refrigeration system evacuation and high precision laboratory tests.

  • 24,779.66

    Supco VG640 Digital Vacuum Gauge

    Brand:Supco

    Supco VG640 Digital Vacuum Gauge is the Vacuum Sentry (V640 Series) monitors framework benefit action and gives notification when pre-set alert limits.
    Applications: High precision laboratory tests, measurements to conform system leaks, vacuum measurement during system  evacuation