Ace Flame Proof Oxygen Monitor
₹37,125.00 – ₹42,504.00
(GST 18% Exclusive)
159140
159140
Ace Flame Proof Oxygen Monitor is a high precision microcontroller-based gas transmitters housed in flameproof aluminum LM-6 Body certified by CIMFR, Dhanbad for use in hazardous Gas Group/Zones Areas I, II, IIA & IIB. This monitor is equipped with 4 digit LED that displays oxygen gas concentration in the range of 0 to 25% Volume.
Applications: Respiration, Marine, Fast Reaction Monitoring, Fuel Tank Monitoring, Certain Hydrocarbon Environments, Fermentation, Medical and Pharmaceutical, Bulk Drug manufacturing plants
Products related to this item
-
₹37,125.00 – ₹42,504.00(GST 18% Exclusive)
Flameproof Oxygen Monitor AI-02-FLP
-
₹23,017.50 – ₹24,763.20(GST 18% Exclusive)
Ace AI-CL-O2 Clean Room Oxygen Monitor
-
₹17,332.00(GST 18% Exclusive)
Lutron DO 5510 Dissolved Oxygen Monitor
-
₹37,510.00 – ₹37,570.50(GST 18% Exclusive)
ACE AI-O2-Tx Digital Oxygen Transmitter (0 to 100% Vol or 0 to 25% Vol)
-
₹64,515.26(GST 18% Exclusive)
Hanna HI8410 Dissolved Oxygen controller
-
₹39,677.97
(GST 18% Exclusive)
ATI Q45D Dissolved Oxygen Transmitter
Ace Flame Proof oxygen Monitor is a high-precision microcontroller-based gas transmitter housed in flameproof Al LM-6 Body certified by CIMFR, Dhanbad to be used in hazardous Gas Group/Zones Areas I, II, IIA & IIB. This monitor is supplied with four-digit LED that displays oxygen gas concentration within the vary of zero to the twenty-fifth Volume.
Features of Ace Flame Proof Oxygen Monitor:
- Industrial Standard, 4-20 mA O/P available
- Assures proper operation of the transmitter without calibration gas using the Loop test.
- Power on startup through the intelligent electronic, self-driven menu
- Microcontroller Based Software Calibration – No Trim Pots
- Calibration Possible In Atmospheric Air
- Easy Programming With Password Protection
- Easy-to-read Display, Fast Response
- Built-in Reverse Polarity Protection
- Can also be used in Hazardous Area, ATEX, CCOE, CMRI & IP-65 Approved
Additional information
| Weight | 1 kg |
|---|---|
| Manufacturer | Ace |
| Model | AI-02-FLP |
| Measuring Parameters | Oxygen |
| Range | Standard 0 to 25% Volume orOptional 0 to 100% Volume (Contact Store) |
| Accuracy | ± 1% of the full scale value |
| Sensor Type | Electrochemical sensor, Imported make |
| Sensor life | Approx. 3-4 years ; Replaceable basic sensor |
| Loop Output | Industrial standard 4-20mA DC O/P with permissible load 750 ohm at 24 VDC, 25mA |
| Display | 0.5”, 3½ digit LED Display |
| Set Point | 1 No. Relay Output (NO/CO/NC), 2 Amps rating |
| Setting | Keypad Inside the enclosure for setting the relay set points |
| Supply voltage | 24 VDC, 300mA |
| Enclosure | Flameproof Aluminum LM-6 Body certified by Central Institute of Mining & Fuel Research, CIMFR, Dhanbad, India for use in Gas Group Areas I, II,IIA & IIB |
| Cable gland | 3 Nos. Cable Gland Entries for 3/4" ET |
| Warranty | 12 Months Manufacturer Warranty |
| Enclosure Dimensions | 190 X 185 X 100 mm |
| Weight | 1.5 Kgs Aprox. |
| Select Pack | Standard 4-20mA, Standard 4-20mA + RS485 Communication, Standard 4-20mA + RS485 Communication + Relay |
DS_Flp Oxygen Monitor Updated_Ver1.0