-
Shinyei OMX Series Handheld Odor Meter
Shinyei OMX Series Handheld Odor Meter is a specified tool for the Odor analysis. It Indicates the relative strength and odor classification numerically by comparing odor gas and purified air. The values shown on display are calculated based on the original principle.
Application: Agriculture, Chemical manufacturing, Cosmetics manufacturing, Pharmaceutical manufacturing, Waste management
-
Bosean BH-60 Fixed Hexane Detector for Oil Plant
Bosean BH-60 Fixed Hexane Detector for Oil Plant is a device designed to detect Hexane, flammable gases, toxic gases, and other harmful gases in the air. When the gases reach or exceed the preset alarm value. The controller will give an audible and visual alarm, and promptly remind people to take safety measures to prevent the occurrence of explosions and poisoning incidents. Thus ensuring the safety of life and property.
Applications: Petrochemical Industries, Oil Refinery, boiler rooms, Chemical plants, LPG stations, painting plants and other places with gas exists. -
₹48,000.00
Bosean BH-60 Fixed O2 Gas Detector
Bosean BH-60 Fixed O2 Gas Detector with Display is designed to detect flammable gases, toxic gases, and other harmful gases in the air. When the gases reach or exceed the preset alarm value. The controller will give an audible and visual alarm, and promptly remind people to take safety measures to prevent the occurrence of explosions and poisoning incidents. Thus ensuring the safety of life and property.
Applications: Petrochemical Industries, Oil Refinery, boiler room, Chemical plants, LPG station, painting plant and other places with gas exists. -
Bosean BH-60 Fixed LEL Gas Detector
Bosean BH-60 Fixed LEL Gas Detector with Display is designed to detect flammable gases, toxic gases, and other harmful gases in the air. When the gases reach or exceed the preset alarm value. The controller will give an audible and visual alarm, and promptly remind people to take safety measures to prevent the occurrence of explosions and poisoning incidents. Thus ensuring the safety of life and property.
Applications: Petrochemical Industries, Oil Refinery, Chemical plants, LPG station, boiler room, painting plant and other places with gas exists. -
₹47,275.00Bosean K600 Multi-Gas Detector
Bosean K600 Multi-Gas Detector is a portable multigas detector comes with an built in Pump and also the Intelligent Gas Detector. Which adopts an advanced Integrated Circuit, with Standard Integrated Technology Design and digital analog hybrid communication technology. It Detects the Explosive Gases (Ex) , Hydrogen sulfide (H2s), Carbon Monoxide (CO), Oxygen Gas (O2) in Industrial areas and many other applications. It is a Portable Multigas Detector which is very simple to use and maintain. This Multigas Detector is water-proof, dust-proof and explosion-proof. Thus, the K600 Multigas Detectors greatly meets the safety requirements of industrial sites with high reliability.
Applications: Petroleum Industries, chemical Industries, refining, environmental, metallurgy, gas transmission and distribution, biochemical medicine, agricultural and other industries. -
Kitagawa Gas Detector Tube System
Kitagawa Gas Detector Tube System is a detecting tube that is designed to measure accurate gas range readings in minutes. Kitagawa Gas Tubes are user-friendly, safe, and easy to measure the gas and its ranges. No power supply and Calibration are required for these Gas Detecting tubes and low-cost analysis for your gas detection needs.
Applications: Labs, Pharmaceuticals, biochemical industries, etc.
-
Drager Gas Detector Tubes and Pump
Drager Gas Detector Tubes and Pump are very reliable in use even with complex compounds and mixtures of substances. This Drager Tube pump allows you to use the established Drager Tubes to take measurements under extreme conditions. These Drager Tubes have already been calibrated for simple to use and form a perfect unit with the Drager Tube pump.
Applications: Petroleum Industries, chemical Industries, refining, environmental, metallurgy, gas transmission and distribution, biochemical medicine, agricultural and other industries. -
Dräger Polytron IR N2O Fixed Gas Detector
Dräger Polytron IR N2O Fixed Gas Detector for the continuous monitoring of nitrous oxide in the ambient air. Its measuring range of full-scale deflection can be configured between 300 and 1000 ppm.
-
MSR MC2 NH3 Gas Sensor Transmitter
MSR MC2 PH3 Gas Sensor Transmitter houses a module with µController, analog output and power supply in addition to the electrochemical sensor element including amplifier. The µController calculates a linear 4 – 20 mA (or 2 – 10 V) signal out of the measurement signal and also stores all relevant measured values and data of the sensor element.
Applications:
The µGard®2 Sensor MC2 is used for the detection of toxic gases or for oxygen monitoring wherever a typical 4 – 20 mA (or 2 – 10 V) signal is required.
-
₹25,000.00Honeywell BW Solo Oxygen Gas Detector (Wireless)
Honeywell BW Solo Oxygen Gas Detector provides a quick readings display that alerts workers in hazardous-area which in return helps personnel to respond faster. With long life and low-cost BW Solo is the easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries, and sensor filters.
Applications: Steelworks, Petrochemical plant, Mining, Power supply works, Sewage treatment plant, Hermetically-sealed area (manhole, tank). -
₹73,631.78Honeywell Toxirae Pro H2S Single Gas Monitor
Honeywell Toxirae Pro H2S Single Gas Monitor is the world’s first wireless personal monitor for toxic gases and oxygen. It can detect a broad range of gases—from carbon monoxide, hydrogen sulfide, and oxygen to ammonia, chlorine, and formaldehyde.
Application: (Petro)chemical plants and factories, Tank storage parks, Wastewater treatment facilities, Mining industry, Construction sites, Food, and beverage industries.
-
₹56,055.08
SENSIT P100 SO2 Gas Detector
Sensit P100 Single-Gas Detector is a personal gas monitor with housing is constructed of durable ABS plastic and shock-absorbing material to protect the instrument from the rigors of field use. Sensors available include hydrogen sulfide, hydrogen cyanide, oxygen, carbon monoxide, nitrogen dioxide, and sulfur dioxide.
Applications: Oil & Gas Exploration, Gas Contractors, Emergency Responders, Emergency Medical Personnel.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters