Hioki DT4261 Digital Multimeter

17,175.00

(GST 18% Exclusive)

In stock

281254

Hioki DT4261 Digital Multimeter can be connected to a computer via USB, allowing measurement data to be transferred to Hioki’s software for further analysis and reporting. Overall, the Hioki 4261 is a high-precision multimeter that is suitable for a wide range of electrical measurement applications. Its accuracy, safety features, and data logging capabilities make it a useful tool for professionals and hobbyists alike.

Applications: Electrical maintenance and troubleshooting, HVAC system maintenance, Automotive repair, Laboratory research, Electronics manufacturing, Renewable energy systems.

Add to Cart Button
Request Quote Image
Category:

Hioki DT4261 digital multimeter is designed to measure various electrical parameters accurately and efficiently. It has a large, backlit display that makes it easy to read measurements even in low light conditions. IN addition to its accuracy, the Hioki DT4261 digital Multimeter also has various safety features. It is designed to meet safety standards such as CAT IV 600V, CAT III 1000V, and EN61010-1. It also has an auto power-off function to conserve battery life. The meter also has a data logging function that can record up to 1000 sets of measurement data. This makes it useful for applications where it is necessary to track and analyze multiple measurements over time.

Features of Hioki DT4261 Digital Multimeter:

  • Measurement functions: The Hioki 4261 can measure AC/DC voltage, AC/DC current, resistance, capacitance, frequency, temperature, and continuity.
  • High accuracy: The meter has a basic accuracy of 0.05% and a maximum resolution of 1μV, 0.01μA, 0.01Ω, and 0.001nF.
  • Safety features: The Hioki 4261 is designed to meet safety standards such as CAT IV 600V, CAT III 1000V, and EN61010-1. It also has an auto power-off function to conserve battery life.
  • Data logging: The meter has a data logging function that can record up to 1000 sets of measurement data.
  • PC connectivity: The Hioki 4261 can be connected to a computer via USB to transfer measurement data to Hikoi’s software for analysis and reporting.
  • Backlit display: The meter has a backlit display for easy reading in low light conditions.

 

Additional information

Manufacturer

Hioki

Model No

DT4261

Measuring Parameters

AC/DC voltage, AC/DC current, resistance, capacitance, frequency, temperature, and continuity.

DC Voltage

600.0 mV to 1000 V, 5 ranges, Basic accuracy: ±0.15% rdg. ±2 dgt.

AC Voltage

6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz Basic accuracy 40 Hz – 500 Hz: ±0.9% rdg. ±3 dgt. (True RMS, crest factor 3 or less)

DC + AC Voltage range

6.000 V to 1000 V, 4 ranges, Frequency characteristics: DC, 40 Hz to 1 kHz
Basic accuracy DC, 40 Hz – 500 Hz: ±1.0% rdg. ±13 dgt. (True RMS, crest factor 3 or less)

LoZ V

600.0 V, 1 range, Frequency characteristics: DC, 40 Hz to 1 kHz
Basic accuracy DC, 40 Hz – 500 Hz: ±1.0% rdg. ±13 dgt. (True RMS, crest factor 3 or less)

Resistance

600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7% rdg. ±3 dgt.

DC Current

600.0 mA to 10.00 A, 3 ranges Basic accuracy: ±0.5% rdg. ±3 dgt.

AC Current

600.0 mA to 10.00 A, 3 ranges Basic accuracy 40 Hz – 500 Hz: ±1.4% rdg. ±3 dgt. (True RMS, crest factor 3 or less) Frequency characteristics: 40 Hz to 1 kHz

AC Current range (use with Clamp on probes)

10.00 A to 1000 A, 7 ranges
Basic accuracy 40 Hz – 500 Hz: Add the Clamp on probe accuracy to ±0.9% rdg. ±3 dgt.
(True RMS, crest factor 3 or less)

Capacitance

1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9% rdg. ±5 dgt.

Continuity Check

Continuity threshold ON : 25 Ω, Continuity threshold OFF : 245 Ω, Response time: 0.5 ms or more

Diode Test

Open terminal voltage: 2.0 V or less, Testing current: 0.2 mA or less, Threshold of forward voltage: 0.15 V to 1.8 V

Voltage Frequency Range

99.99 Hz to 99.99 kHz, 4 ranges (Limited by minimum sensitivity voltage)
Basic accuracy: ±0.1% rdg. ±1 dgt.

Current frequency range

99.99 Hz to 9.999 kHz, 3 ranges (Limited by minimum sensitivity current)
Basic accuracy: ±0.1% rdg. ±1 dgt.

Display

Main and sub displays: 4-digits LCD, max. 6000 digits (excluding frequency measurement), bar-graph

Display refresh rates

5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 times/s)

Power Supply

LR6 (AA) alkaline batteries × 3, Continuous operating time: 130 hr. (without Z3210 installed), 70 hr. (with Z3210 installed and using wireless communications)

Supply Scope

Test Lead L9300 × 1, Instruction Manual × 1, LR6 (AA) alkaline battery × 3, Operating Precautions ×1

Dimension

87 mm (3.43 in.) W × 185 mm (7.28 in.) H × 47 mm (1.85 in.) D, 480 g (16.9 oz.) (with test leads holder and batteries)

Be the first to review “Hioki DT4261 Digital Multimeter”

Reviews

There are no reviews yet.

Translate

Main Menu

Hioki DT4261 Digital Multimeter

Hioki DT4261 Digital Multimeter

17,175.00

(GST 18% Exclusive)

Add to cart