-
ThermoFisher Niton XL2100 PMI/XRF Analyser
ThermoFisher Niton XL2100 PMI/XRF Analyser offers high performance and advanced electronics while maintaining the point-and-shoot simplicity that is the hallmark of all our x-ray fluorescence (XRF) instruments. Sealed against moisture and dust with 100% embedded software tools, these analyzers are lightweight yet ruggedly built to withstand the harshest environments – in the field or on the shop floor.
Applications: Scrap metal sorting, geochemical assays, and soil testing, Positive Material Identification (PMI).
-
SciAps X-200 PMI/XRF Analyser
SciAps X-200 PMI/XRF Analyser offers superior speed and performance to the top end analyzers of other brands. It is also a Fast, precise analysis for RoHS elements Pb, Hg, Cd, Br, and Cr. Also includes other restricted materials plus halogen-free. Operates at 3 different beam conditions for optimized limits of detection across the entire periodic table.
Applications: Scrap metal sorting, geochemical assays, and soil testing, Positive Material Identification (PMI).
-
Hitachi X-MET8000 Smart PMI XRF Analyser
Hitachi X-MET8000 Smart PMI XRF Analyser is a Lightweight, compact and handy. The X-MET8000 is used by an icon-built touch-screen and comes pre-calibrated for many functions. Easy to use and its military-grade robustness is more than a match for the dirtiest, hottest, and most harsh environments. Also, optional window protection can protect the detector from sharp and rough materials.
Applications: Scrap metal sorting, geochemical assays, and soil testing, Positive Material Identification (PMI).
-
Drager X Plore 3300 Half Face Respiratory Mask
Drager X Plore 3300 Half Face Respiratory Mask is a perfect combination of modern design and lightweight offer you extra protection and comfort. It is also low maintenance and cost effective mask for long lasting protection under tough conditions.
Applications: Handling of dusts and/or gases and vapours
-
Driesen DK8040 Data Logger with GPRS
Driesen DK8040 Data Logger with GPRS is a robust and flexible stationary data logger for measuring climate parameters. The loggers are battery-powered and store up readings on a memory card.
Applications: Water Balance Studies, Seepage Water Studies, Waste Water Management, Irrigation Control, Environmental Studies
-
LC-NDT DT-200 Separate Probe Densitometer
LC-NDT DT-200 Separate Probe Densitometer is a robust, easy-to-use, independent densitometer of the probe type for x-ray film transmission density measurement. The unit is intended for use in mobile single-site darkrooms, labs, and offices.Applications: Mobile darkrooms, offices, laboratories -
Dwyer PBLT2 and PBLTX Submersible Level Transmitter
Dwyer PBLT2 and PBLTX Submersible Level Transmitter are manufactured for years of trouble-free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure.
Applications: Wastewater, Sludge pits, clarifiers, digesters, Alum tanks, Chemical storage tanks, Oil tanks, Lime slurry, Sumps, Reservoirs -
Gray Wolf DirectSense II Advanced Environmental Probe
Gray Wolf DirectSense II Advanced Environmental Probe measures key specific pollutants (e.g. VOCs, CO, O3, NH3, NO2, HCHO: choose from 20+ gases), as well as Particulate, Ventilation Rates (CO2 and Airflow), Pollutant Pathways (DP) and more. High performance, fast response instrumentation optimized for portable and long-term IAQ testing.
Applications: Used for IAQ applications, to measure for asthma triggers, to check indoor air quality in car cabins, in IVF labs.
-
MSR MC2 H2S Gas Sensor Transmitter
MSR MC2 H2S Gas Sensor Transmitter houses a module with µController, analog output and power supply in addition to the electrochemical sensor element including amplifier. The µController calculates a linear 4 – 20 mA (or 2 – 10 V) signal out of the measurement signal and also stores all relevant measured values and data of the sensor element.
Applications:
The µGard®2 Sensor MC2 is used for the detection of toxic gases or for oxygen monitoring wherever a typical 4 – 20 mA (or 2 – 10 V) signal is required.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters