Ace AI-2200 Hand Operated Vacuum and Pressure Pump Calibrator
₹21,210.00 – ₹31,110.00
(GST 18% Exclusive)
113503
113503
(However please contact store for precise delivery schedule. Backorder also allowed)
Ace AI-2200 Hand Operated Vacuum and Pressure Pump Calibrator is a hand-operated pump that generates both pressure and vacuum with the help of a caliper handle. This Pneumatic Calibrator moves the piston back and forth thereby resulting in the formation of vacuum and pressure.
Applications: HVAC Systems, Process Industry, Medical Equipment Testing, Laboratories, Aerospace, and Automotive, Generally used in testing and calibration purposes for Pressure and Vacuum gauges in laboratories and field areas.
Products related to this item
-
₹19,500.00 – ₹27,720.00(GST 18% Exclusive)
Ace IK-HPP-01 Magnehelic® Gauge Calibrator
-
₹58,240.00Keller Hand-Pump Pressure Calibrator
-
₹37,600.00 – ₹85,250.00(GST 18% Exclusive)
Ace AI-PCAL1 Bench Top Pressure and Vacuum Calibrator
-
₹65,600.00 – ₹68,880.00Ace AI-DBC Dry Block Temperature Calibrator
-
₹48,450.00 – ₹54,720.00(GST 18% Exclusive)
Ace AI-2300 High Pressure Hand Pump Calibrator
-
₹5,904.00(GST 18% Exclusive)
Ace CAL-404 RTD Calibrator
Ace AI-2200 Hand Operated Vacuum and Pressure Pump Calibrator is easy to use and operated manually with a Pressure generation upto 30 Bar and Vacuum up to -0.9 Bar. This Pressure and Vacuum Pump Calibrator is economical and accommodates most digital gauges as master for calibration and comparison purposes.
Guidelines for safe usage:
- Use the Hand Pump only for calibration.
- Clean the gauge inlet thread and the inlet hole for any dirt or any oil before connecting with the pump. These can choke the pump.
- Always wear protective gear while doing the calibration.
WARNING
- To ensure the safety of the users and to avoid damage to this apparatus, please ensure the following:
- DO NOT operate this to generate pressure above 30 BAR.
- These Vacuum and Pressure Pump Calibrator are mostly used for Calibration works
- The life of spares such as O-rings can be shortened by exposure to atmospheric conditions. For storage use an airtight container.
- Never remove the SS fittings fitted in the pump. These are fitted and tested for leakage. Use of Teflon tape on these parts after removal and refixing will damage the threads in the pump and our guarantee will become null and void
Additional information
| Weight | 1.5 kg |
|---|---|
| Manufacturer | Winters Master Gauge |
| Measuring Parameters | Pressure, Vacuum |
| Vacuum Range | Amb to -0.9 Kg/Cm² |
| Pressure Range | Amb to 30 Kg/Cm² |
| Pressure Ports_1 | SS 304 |
| O-Rings | Nitrile rubber |
| Fittings | SS 304 |
| Pressure Adapters kit | 1/2''BSPM x 3/8'' BSPF – 01 No. & 1/2''BSPM x 1/8'' BSPF – 01 No. |
| Connection Type | ½” BSPF |
| Material Of Construction | Aluminium |
| Box Contains | Pneumatic Hand Pump ,Spare fittings, Spare O-rings, Flexible hose |
| Weight | 900 Grams |
| Manufacturer | Winters |
| Model No | DPG Series |
| Ranges | -1 to 0 Bar, -1 to 3 Bar, -1 to 25 Bar, 0 to 30 Bar |
| Accuracy | ±0.5% |
| Resolution | 1 mmHg/ 1mBar |
| Display | 4 digit – 2′′ x 3/4′′ (48mm x 16mm) |
| Operating Temperature | -10 to +50 °C |
| Storage Temperature | -20 to 75 °C |
| Sensor Type | 316L welded, Piezo |
| Rubber Boot | Silicone rubber (IP65) |
| Case Material | ABS (IP64) |
| Response Time | ≤ 3 Hz display refresh rate |
| Connection | 1/4′′ NPT 304SS |
| Power Supply | 2 x AAA battery (1.5V) |
| Power off | Auto or manual shut-off |
| Battery Life | 2yrs (auto shut-off mode) |
| Operation Life | 1 million cycles |
| Calibration | Will be provided at no extra cost valid for 1yr traceable to National/International standards |
| Warranty | 1 Year Manufacturing Warranty |
| Case Size | 2.5′′ (63mm) |
| Weight | 400 Grams |
DS_Ace-AI-2200-Hand-Operated-Vacuum-And-Pressure-Pump-Calibrator_Ver1.0
Reviews
There are no reviews yet.