-
₹6,825.00Dwyer 2015 Magnehelic® Differential Pressure Gauge
Dwyer 2015 Magnehelic® Differential Pressure Gauge is a device used to measure the difference in pressure between two points in a system. It is a mechanical gauge that uses a diaphragm and a magnet to indicate the difference in pressure on a scale. This Differential Pressure Gauge has a circular dial face that displays the pressure measurement in inches of the water column (in. WC).
Applications: HVAC systems, clean room environments, and laboratory testing. -
Dwyer 607-7 Differential Pressure Transmitter
Dwyer 607-7 Differential Pressure Transmitter converts positive, negative (vacuum) or differential pressures of clean, dry air, or other non-conductive, non-corrosive gases into a standard two-wire, 4-20 mA output signal. Dwyer 607-7 is highly resistant to overpressure, shock, and vibration. The 607-7 series is designed for use with air and other compatible gases, making it versatile in various industrial and laboratory settings.
Applications : HVAC Systems, Cleanroom Environments, Industrial Process Control, Dust Collection Systems, Aerospace Industry
-
₹85,020.00Dwyer A-396A Calibration Pump
Dwyer A-396A Calibration Pump is a device that designed to calibrate the Pressure Gauges, Transmitters or to set the Pressure Switches. This Pressure Calibrator Generates the pressure upto 72 psig (5 Bar). This Dwyer Calibrator Pump is the best solution for Calibration Labs to calibrate the Pressure related devices.
Applications: Used in Calibration Labs to Calibrate the Pressure Gauges, Pressure Transmitters and Pressure Switches. -
₹37,128.22Dwyer DPG-208 Digital Pressure Gauge
Dwyer DPG-208 Digital Pressure Gauge has a precise ±0.25% full-scale accuracy. This 4 digit digital display is used to reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages.
Applications: Level Control, Pump Control, Process Control, Compressor Control
-
₹14,596.00 – ₹19,929.00Dwyer® AVUL Series Air Velocity Transmitter
Dwyer®Air speed transmitter precisely measures airspeed or volumetric stream in magnificent or metric units. Synchronous current and voltage yields on all models give widespread contributions to observing gear while the yield range, units, and 0 to 5/10 VDC yield can be designed by means of neighborhood DIP switches.
Applications: VAV Systems, Building ducts
-
₹3,010.00Metravi 1330 Digital Lux Meter
Metravi 1330 Digital Lux Meter is a device used to measure the amount of light present in workplaces. This digital light meter has an LCD with a low battery indication in it. It is easy to use with single function switch operating, lightweight, and pocket friendly
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹5,480.00Metravi 1333 Digital Lux Meter
Metravi 1333 Digital Lux Meter is a portable device used to measure the luminous flux per unit area with the help of a photodetector filter of one silicon photo diode and spectral response. It has a large LCD backlit display which helps the users to read easy
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹6,155.50Metravi 19 Super Digital TRMS Multimeter
Metravi 19 Super Digital TRMS Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure AC/DC voltage, AC/DC current, Resistance, Capacitance, Frequency (Electrical and Electronic), Duty Cycle, Diode test, Continuity plus Thermocouple Temperature.
Applications: -
Metravi AT500 Non-contact High Voltage Detector (Arm Type)
Metravi AT500 Non-contact High Voltage Detector is a device used to remind the electrical worker to
pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This High Voltage Detector can also be used for line fault
detection and electroscope.Applications: Electrical Installations, Power Distribution Systems, Industrial Machinery, HVAC Systems, Renewable Energy Systems, and Safety Inspections etc.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters