• Lux Meter

    Metravi 1330 Digital Lux Meter


    Metravi 1330 Digital Lux Meter is a device used to measure the amount of light present in workplaces. This digital light meter has an LCD with a low battery indication in it. It is easy to use with single function switch operating, lightweight, and pocket friendly

    Applications: offices, factories, hotels, hospitals, schools, etc.

  • Digital Lux Meter

    Metravi 1333 Digital Lux Meter


    Metravi 1333 Digital Lux Meter is a portable device used to measure the luminous flux per unit area with the help of a photodetector filter of one silicon photo diode and spectral response. It has a large LCD backlit display  which helps the users to read easy

    Applications: offices, factories, hotels, hospitals, schools, etc.

  • Loop Calibrator

    Metravi 15+ mV mA with Loop Calibrator


    Metravi 15+ mV mA with Loop Calibrator purpose is to measure millivolts (mV) and milliamps (mA) with accuracy. It can also perform loop calibration. The users can ensure instrument accuracy and industry compliance by simulating and calibrating current loops using the loop calibration function.

    Applications: HVAC. Process Control Industries, Instrumentation and Automation, Field Calibration, Electrical Maintenance and Troubleshooting, Laboratories and Research Facilities.

  • Metravi-19-Super Digital TRMS Multimeter

    Metravi 19 Super Digital TRMS Multimeter


    Metravi 19 Super Digital TRMS Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure AC/DC voltage, AC/DC current, Resistance, Capacitance, Frequency (Electrical and Electronic), Duty Cycle, Diode test, Continuity plus Thermocouple Temperature.

  • Air Particle Counter

    Metravi APC-81 Air Particle Counter


    Metravi APC-81 Air Particle Counter can measure up to six channels of particle sizes, along with air temperature, relative humidity, dew point, and wet bulb temperature. It also detects HCHO and CO gases. This Handheld Air Particle Counter Equipped with a TFT LCD display and a built-in camera, it allows for capturing videos and photos, which can be stored on internal memory or a microSD card.

    Applications : Cleanrooms, HVAC, Aerospace, Research and Development


  • High Voltage Detector

    Metravi AT500 Non-contact High Voltage Detector (Arm Type)


    Metravi AT500 Non-contact High Voltage Detector is a device used to remind the electrical worker to
    pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This High Voltage Detector can also be used for line fault
    detection and electroscope.

    Applications: Electrical Installations, Power Distribution Systems, Industrial Machinery, HVAC Systems, Renewable Energy Systems, and Safety Inspections etc.

  • Portable vibration meter

    Metravi AVD-80 Portable Vibration Meter


    Metravi AVD-80 Portable Vibration Meter is a digital vibration meter. The device is simply a pocket-sized and lightweight device, and it has a backlight display. and an automatic option for power ON/OFF. Low battery warning with text. Pocket-sized and light. It measures velocity, acceleration, and displacement. suitable for monitoring machinery vibration caused by imbalance, misalignment, and gear faults. microcontroller based.

    Applications: Predictive Maintenance, Machinery Condition Monitoring, Quality Control, Shaft Alignment, Unbalance Detection.

  • Hot Wire Anemometer

    Metravi AVM-10 Hot Wire Anemometer With USB Interface


    Metravi AVM-10 Digital Hot Wire Anemometer is used in various environments and comes with a dual display, it allows user to monitoring of air velocity and temperature. This Hot Wire Anemometer supports multiple units of measurement for air flow (m/s, km/h, ft/min, MPH, Knots) and temperature (ºC / ºF), catering to diverse user preferences and requirements.

    Applications: Air conveyors, Environmental testing, Flow hoods, Air velocity, Air balancing, Clean rooms, Furnace velocity, Fans/motors/blowers, Paint spray booths and Refrigerated case.

  • Placeholder

    Metravi CAL 400-3 Digital Milli Volt Milli Amp Calibrator


    Metravi CAL 400-3 Digital Milli Volt Milli Amp Calibrator is a portable instrument for Calibrating process devices and measuring Process signals. This Milli Amp Calibrator Powers or measures a two-wire Current loop. Four functions provide the quality and accuracy of the Hand-Held  Calibrator.

    Applications: Machine building, Shipbuilding, Measurement, and Control Technology, Hydraulics and Pneumatics, Pumps and Compressors, etc.

  • Bench Type RTD Calibrator

    Metravi CAL-408 Bench Type RTD Calibrator


    Metravi CAL-408 Bench Type RTD Calibrator offers a wide temperature range and high accuracy making it appropriate for calibrating RTDs across various industries. This RTD calibrator ensures long-term durability and performance with its robust construction and quality components. This allows you to compare the reading of your RTD with the known output from the calibrator to ensure its accuracy.

    Applications: Industrial Calibration Laboratories, Process Industries, Instrumentation Maintenance, Environmental Monitoring, HVAC, Manufacturing and Quality Control, Research and Development etc.

  • Clamp On Ground Resistance Tester

    Metravi CET-05 Clamp On Ground Resistance Tester


    Metravi CET-05 Clamp on Ground Resistance Tester is a state of the art instrument designed to simplify and enhance ground resistance measurements in various electrical systems and installations. The CET-05 is equipped with a clamp-on design, allowing users to measure ground resistance without the need for ground rods or disconnecting the grounding system. This feature makes it exceptionally convenient for both routine maintenance and troubleshooting.

    Applications: Electrical Substations, Industrial Plants, Commercial Buildings, Telecommunications Facilities.

  • Coating Thickness Meter

    Metravi CTG-01 Coating Thickness Meter


    Metravi CTG-01 Coating Thickness Meter measures the thickness of Non-magnetic coatings (e.g. paint, zinc) on steel and insulating Coatings (e.g. paint, anodizing coatings) on nonferrous metals. This has two different operating modes, such as DIRECT mode is recommended for simple, quick, occasional measurements and GROUP mode permits the measurement and storage of readings in a free programmable memory. The probe system is spring-mounted inside the probe sleeve, guaranteeing steady and secure probe positioning as well as consistent contact pressure.

    Applications: Automotive Industry, Aerospace Industry, Manufacturing, Metal Fabrication, Marine Industry, Electronics Industry, Infrastructure Maintenance, Quality Control and Inspection.


Main Menu