-
Keller High Temperature Pressure Transmitters Series 35X HTC
Keller High-Temperature Pressure Transmitters Series 35X HTC is a device used to measure the piezoresistive high-temperature transmitter that is appropriate for medium temperatures up to 300 °C. This Keller Transmitter is pressed on the flush diaphragm and transmitted through an oil-filled capillary and onto the silicon measuring cell. The Pressure Transmitter’s capillary serves as a cooling spiral, enabling media, temperatures as high as 300 °C. The PROG30 program may be used to read out the electronics’ temperature, which cannot be higher than 120 °C. KELLER provides pressure ports in a variety of materials for very aggressive media.
Applications: General industrial and OEM applications -
₹32,025.00 – ₹50,984.00
Keller LEO2-Ei Digital Manometer
Keller LEO2-Ei Digital Manometer are provide high accuracy. The minimum or most value since the last reset can be displayed at a similar time because the current pressure value in a wide variety of units of pressure. The swivel adapter permits the device to be optimally positioned. Power is provided by a conventional CR2430 coin cell battery.
Applications: Industrial Applications, Servicing, Calibration / Testing.
-
₹1,355.08
Selec TC 513BX Digital Temperature Controller
Selec TC 513BX Digital Temperature Controller is a complex auto-tuning PID controller or on/off controller with the selectable thermocouple, RTD up to two outputs. Versions are accessible with various hand-off and SSR outputs.
Applications: Industrial usage
-
₹1,849.90
Selec TC203 Temperature Controller
Selec TC203 Temperature Controller is a refined auto-tuning PID controller or on/off controller with the selectable thermocouple, RTD up to two outputs. Variants are accessible with various transfer and SSR outputs. The digital temperature controller can be arranged as on/off or PID control and caution yields, or as 2 on/off or PID controls (heat/cool) in addition to 1 alarm output. This Temperature Controller has a substantial double 3 digit LED display to demonstrate the setpoint and the procedure esteem and is reasonable for use with power supplies of 85 to 270 VAC
Applications of selec TC203 temperature controller: Jacketed pans, Tracer lines, Tanks, Acid baths, Hot water storage calorifiers, Heater batteries, Unit heaters, HVAC, Pharma, Industries, Automation, etc. -
SELEC TC221 Temperature Controller
SELEC TC221 Temperature Controller is a sophisticated auto-tuning PID controller or on/off controller with the selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs.
Applications: Furnaces, ceramic kilns, boilers, and heat exchangers, Packaging, Plastics, Healthcare, Food & Beverage.
-
₹1,829.00
Selec TC303 Temperature Controller
Selec TC303 Temperature Controller is an auto-tuning PID temperature controller with the selectable thermocouple, RTD up to two outputs. This Selec temperature controller can be configured as on/off or PID control and alarm outputs.
Application: Jacketed pans, Tracer lines, Tanks, Acid baths, Hot water storage calorifiers, Heater batteries, Unit heaters. -
₹1,195.34 – ₹1,745.00
SELEC TC513 Temperature Controller
SELEC TC513 Temperature Controller is an advanced auto-tuning PID controller or on/off controller with a selectable thermocouple, RTD up to two outputs. Forms are accessible with various hand-offs and SSR output.
Applications: Heat Treat/Oven, Packaging, Healthcare, HVAC, Food & Beverage
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters