• 39,819.00

    ABB 266HSH Pressure Transmitter

    Brand:ABB

    ABB 266HSH Pressure Transmitter is a high overload pressure transmitter that works with maximum working pressure up to 105Mpa, 15225 psi which is suitable for measuring liquid, gas, or steam pressure in a pipe or on an open tank. The communication option for ABB 266HSH includes Modbus®, along with 4-20mA HART, low-power 1-5V HART, Wireless HART, Profibus, and Foundation Fieldbus.
    Applications: Panel Meter, Switches, Pumps, PLC, etc.

     

  • 38,922.00

    ABB TTF300 Field mounted Temperature Transmitter

    Brand:ABB

    ABB TTF300 Field mounted Temperature Transmitter are developed and tested series of ABB with lightweight and reliable field mounted temperature transmitters are accommodated in field housings with optional indicators.

    Applications: Temperature & process indication, Plastics molding/extrusion temperature monitoring, Heat treatment – furnace temperature monitoring,

  • 20,250.00

    ABB TTH300 Head Mounted Temperature Transmitter

    Brand:ABB

    ABB Head Mounted Temperature Transmitter can be configured via FDT / DTM in DAT200 (Asset Vision Basic) or any standard FTD tool via EDD or local HMI (optional).
    Applications: Temperature measurement in air, soil, measurement of delicate surfaces, Oil, Research and Development, Industrial Safety, Hazardous Areas, and pharmaceutical.

  • 65,229.15

    ABB  FEP-300 Magnetic Flow Meter

    Brand:ABB

    ABB  FEP-300 Magnetic Flow Meter is powerful transmitter which easy to use and provides the output signal that meets the needs. It is a versatile, reasonably priced, most accurate flow meter tailored for all process industry applications.

    Applications: Chemical, Power, Oil & Gas, Pulp & Paper and Metals & Mining, Water distribution network, clean water supply, Monitoring and optimization of pump efficiency, Calculation of distribution system losses, Calculation of bills for water supplied, Irrigation systems etc.

  • 3,010.00

    Metravi 1330 Digital Lux Meter

    Brand:Metravi

    Metravi 1330 Digital Lux Meter is a device used to measure the amount of light present in workplaces. This digital light meter has an LCD with a low battery indication in it. It is easy to use with single function switch operating, lightweight, and pocket friendly

    Applications: offices, factories, hotels, hospitals, schools, etc.

  • 5,480.00

    Metravi 1333 Digital Lux Meter

    Brand:Metravi

    Metravi 1333 Digital Lux Meter is a portable device used to measure the luminous flux per unit area with the help of a photodetector filter of one silicon photo diode and spectral response. It has a large LCD backlit display  which helps the users to read easy

    Applications: offices, factories, hotels, hospitals, schools, etc.

  • 6,155.50

    Metravi 19 Super Digital TRMS Multimeter

    Brand:Metravi

    Metravi 19 Super Digital TRMS Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure AC/DC voltage, AC/DC current, Resistance, Capacitance, Frequency (Electrical and Electronic), Duty Cycle, Diode test, Continuity plus Thermocouple Temperature.
    Applications: 

  • Metravi AT500 Non-contact High Voltage Detector (Arm Type)

    Brand:Metravi

    Metravi AT500 Non-contact High Voltage Detector is a device used to remind the electrical worker to
    pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This High Voltage Detector can also be used for line fault
    detection and electroscope.

    Applications: Electrical Installations, Power Distribution Systems, Industrial Machinery, HVAC Systems, Renewable Energy Systems, and Safety Inspections etc.

  • Senko SI-100 Ammonia Gas Detector

    Brand:Senko

    Senko SI-100 Ammonia Gas Detector installed in a place where a potential gas hazard exists to measure Ammonia(lel). It not only shows the concentration of gas but also diagnostic results of the unit itself through the LCD display and can be connected to the controller with a standard 4-20mA analog output communication or RS-485 digital communication.

    Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.

  • Senko SI-100 Carbon Dioxide Gas Detector

    Brand:Senko

    Senko SI-100 Carbon Dioxide Gas Detector typically finds its place in human-environmental related applications. It shows the concentration of CO2 in ppm levels and alerts users when the setpoints are violated. This senko gas detector has the capability of controlling an external motor, exhaust, etc. at user-defined set points. Other important feature includes 4-20mA output and optional communication of RS485 to integrate with BMS systems.

    Applications: Workspace, Educational Institutions, Labs, Chemical & Bulk Drugs Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.

  • Senko SI-100 Carbon Monoxide Gas Detector

    Brand:Senko

    Senko SI-100 Carbon Monoxide Gas Detector is a fixed type gas detector that gives continuous readings of carbon monoxide concentration in a particular area. The LCD display makes it easier for users to view the ppm levels locally. The instrument is also equipped with standard 4-20mA analog output communication or RS-485 digital communication for PLC/SCADA integration.

    Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.

  • Senko SI-100 Hydrogen Sulfide Gas Detector

    Brand:Senko

    Senko SI-100 Hydrogen Sulphide Gas Detector displays the concentration of the H2S level with continuous readings on the LCD display. This Senko H2S detector Detector is well equipped to be used in Flameproof areas with all global approvals. The Instrument can be connected to PLC/SCADA with RS485 or 4-20mA output option.
    Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.

Main Menu