-
Fluke 80PK-22 SureGrip™ Immersion Temperature Probe
Fluke 80PK-22 SureGrip™ Immersion Temperature Probe is designed for use in liquid and gels. It can also be used as a general-purpose temperature probe. The thermocouple junction is protected from tip to handle by an Inconel sheath. The 80PK-22 can be used with any temperature-measuring instrument that is designed to accept type K thermocouples and has a miniature connector input.
Applications: laboratories, catering, industry, HVAC Technology, etc.
-
Fluke TiS55+ Thermal Imager
Fluke TiS55+ Thermal Imager is a device that indicates the temperature of the objects .This fluke tis 55+ thermal images has a 3.5″ VGA Touchscreen LCD display which has Water and dust resistant (IP54). In this thermal imager it has built-in +’s personal assistants, you can finally ditch the clipboard since all the information you want is there in the pictures you capture, including Voice annotation, IR-Photo Notes, and Asset Tagging.
Applications: Detect mould-prone areas, locate thermal bridges, and identify overheated connections -
Fluke 700HTP-2 Hydraulic Test Pump
The Fluke 700HTP- 2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to,000 psi/ 690 bar.
Ideal for calibration when connected to a Fluke high pressure module via the reference port. The 700HTP- 2 uses distilled water or mineral- grounded hydraulic oil as a source for calibration of high pressure input devices similar as pressure transmitters or pressure needles. Can also be used with Fluke 717 pressure calibrators. -
Fluke 1503 Insulation Resistance Meter
The Fluke 1503 Insulation Resistance Meter is a dedicated electrical testing device meticulously engineered for gauging insulation resistance across diverse electrical systems and components. Its primary function involves assessing insulation quality within these systems, diligently identifying potential problems or defects that may pose electrical safety risks.
Applications: Electrical Equipment Testing, Cable and Wiring Inspections, Cable and Wiring Inspections, HVAC Systems
-
Fluke 375 FC True-RMS AC/DC Clamp Meter
Fluke 375 FC True-RMS AC/DC Clamp Meter is a versatile and accurate instrument for measuring electrical current. It is designed to provide precise readings for both alternating current (AC) and direct current (DC) and offers the added convenience of wireless connectivity through the Fluke Connect app. This tool is ideal for a wide range of electrical testing and monitoring applications.
Applications: Measuring Current, Voltage Measurement, Resistance Measurement, Continuity Testing, Diode Testing.
-
Fluke 700PTP-1 Pneumatic Test Pump
Fluke 700PTP-1 Pneumatic Test Pump portable pneumatic test pump is a reliable powerhouse, offering up to 600 psi for calibrating and testing pressure instruments with ease. Perfect for professionals needing accuracy on the go in industries like manufacturing, oil and gas, and aerospace.
Applications: Instrumentation Calibration, Quality Control & Compliance Testing, Field Service & Maintenance, Laboratory Testing.
-
₹3,264.00Fluke 1AC-II Pocket Sized Voltage Detector
Fluke 1AC-II Pocket Sized Voltage Detector is a Non-Contact voltage tester. The voltage sensing range generally lies between 90V AC to 1000V AC, upon detection, the VoltAlert™ tip glows and beeper sounds. It continually tests its battery and its circuit integrity with a periodic double flash visual indication using Fluke Voltbeat™ technology.
Applications: Test energized circuits and defective grounds, Control Signal identification
-
₹4,356.00Fluke 101 Digital Multimeter
Fluke 101 Digital Multimeter is designed to carry out the basic electrical tests, offering reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This Ohm Meter is small, lightweight multimeter not only fits comfortably in your hand but also is rugged enough to withstand daily use for years to come.
Applications: Commercial electricians, Heating and Air Conditioning systems, etc. -
₹4,864.41Fluke LVD2 Volt Light Detector
Fluke LVD2 Volt Light Detector is Non-contact AC voltage detector that glows LED light when voltage is detected and is designed with easy to use pen-style design. This voltage detector is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications.
Applications: All electrical and electronic industries, commercial, domestic applications. -
₹5,310.00Fluke 59 Mini Infrared Thermometer
Fluke 59 Mini Infrared Thermometer is the perfect solution with a small size and big capabilities. This fluke IR Thermometer has the high laser precision targeting with 2% basic accuracy that enables professionals to analyze heating and ventilation problems and also monitors the temperature of electrical motors and panels without contact.
Applications: Industries, Ducts, Chemical Reactors, engines, Transport…Etc
-
₹5,420.00
Fluke 101 Kit Digital Multimeter
Fluke 101 Kit Digital Multimeter is an electronic instrument which measures parameters like current,voltage, resistance,capacitance and frequency and which is extensively used in Industrial applications. By the rotation of function switch one can easily switch between multiple parameters for particular measurement.
Applications: Commercial electricians, Heating and Air Conditioning systems, etc.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters
