-
₹14,421.19Aerosense AVT Air Velocity Transmitter
Aerosense AVT Air Velocity Transmitter is a blend air speed and temperature transmitter appropriate for estimation in HVAC Duct applications with a flexible neckline rib for simple mounting. With effortlessly configurable yields for both temperature and dampness utilizing jumper settings, it makes air speed and stream estimations a breeze.
Applications: Exhaust stack wind current checking, Ducts, Clean room natural air supply, HVAC air speed estimations, Fan supply, Air Control in drying forms other applications include biological safety cabinets. -
₹4,912.00 – ₹6,389.00Aerosense Differential Pressure Gauge
Aerosense Differential Pressure Gauge is broadly utilized for estimating the differential Pressure in pharma Clean rooms, HVAC applications, Pharmaceutical apparatus, Pass Box, and so on.
Application: Laminar Air Flow Cabinets, Clean Rooms, Biosafety Cabinets, AHU, Etc.
-
₹6,902.12Aerosense Series DPT-R8-3W Differential Pressure Transmitter
Aerosense Series DPT-R8-3W Differential Pressure Transmitter is an extremely versatile transmitter for monitoring pressure. The transmitter for air conforms to MODBUS over serial line protocol, using RTU transmission mode and RS485 interface. The digital output signal is sent over MODBUS enabling the DPT-MOD to connect directly to the field communication network. the benefit of DPT-MOD is that it requires less wiring than traditional 3-wire transmitters since multiple devices can be connected on a serial line.
Applications: Fan, Blower, and Filter monitoring, Pressure and Flow monitoring, Valve and damper control, Pressure monitoring. -
₹3,829.00Selec PID 528 Digital PID Temperature Controller
Selec PID 518 temperature controller is a device widely recognized as an on/off controller, are sophisticated, 4-digit auto-tuning controls with up to 3 outputs equipped for temperature control or process control across a wide range of industrial applications. The controllers can be powered by a set of PT100 (RTD) thermocouples or 2/3 wire input sensors, or by a process signal of millivolt, 0-5Vdc, 0-10Vdc, or 0/4-20mA. There are models with relay, SSR, or analogue outputs that can be set up as one on/off or PID control, up to two on/off or PID controls, and one alarm output.
Applications: Temperature & process indication, Plastics moulding/extrusion temperature monitoring, Heat treatment – furnace temperature monitoring, Chillers, Water heating boilers, Oven Control, Pressure/ Level/ Flow Monitoring.
-
₹1,784.00Selec TC 303A Digital Temperature Controller
Selec TC 303A Temperature Controller Set worth 3 Digit + Process Valuue 3Digit.Long life hand-off contact on evaluated load. One touch PID tuning, Self symptomatic, Rugged and extremely simple to work. Control Mode PID, P, PI, PD, ON/OFF Input J, K, Pt-100, LED display & RTD.
Application: Jacketed pans, Tracer lines, Tanks, Acid baths, Hot water storage calorifiers, Heater batteries, Unit heaters. -
₹1,831.00Selec TC 513AX Temperature Controller
SELEC TC 513AX Temperature Controller is an advanced auto-tuning PID controller or on/off controller with a selectable thermocouple, RTD up to two outputs. Forms are accessible with various hand-off and SSR output. The controller can be arranged as on/off or PID control and caution yields, or as 2 on/off or PID controls (warm/cool) in addition to 1 alert yield. It has a huge double 3 digits LED show to demonstrate the set point and the procedure esteem and is reasonable for use with power supplies of 85 to 270 VAC
-
₹1,355.08
Selec TC 513BX Digital Temperature Controller
Selec TC 513BX Digital Temperature Controller is a complex auto-tuning PID controller or on/off controller with the selectable thermocouple, RTD up to two outputs. Versions are accessible with various hand-off and SSR outputs.
Applications: Industrial usage
-
₹1,849.90
Selec TC203 Temperature Controller
Selec TC203 Temperature Controller is a refined auto-tuning PID controller or on/off controller with the selectable thermocouple, RTD up to two outputs. Variants are accessible with various transfer and SSR outputs. The digital temperature controller can be arranged as on/off or PID control and caution yields, or as 2 on/off or PID controls (heat/cool) in addition to 1 alarm output. This Temperature Controller has a substantial double 3 digit LED display to demonstrate the setpoint and the procedure esteem and is reasonable for use with power supplies of 85 to 270 VAC
Applications of selec TC203 temperature controller: Jacketed pans, Tracer lines, Tanks, Acid baths, Hot water storage calorifiers, Heater batteries, Unit heaters, HVAC, Pharma, Industries, Automation, etc. -
SELEC TC221 Temperature Controller
SELEC TC221 Temperature Controller is a sophisticated auto-tuning PID controller or on/off controller with the selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs.
Applications: Furnaces, ceramic kilns, boilers, and heat exchangers, Packaging, Plastics, Healthcare, Food & Beverage.
-
₹1,829.00Selec TC303 Temperature Controller
Selec TC303 Temperature Controller is an auto-tuning PID temperature controller with the selectable thermocouple, RTD up to two outputs. This Selec temperature controller can be configured as on/off or PID control and alarm outputs.
Application: Jacketed pans, Tracer lines, Tanks, Acid baths, Hot water storage calorifiers, Heater batteries, Unit heaters. -
₹1,195.34 – ₹1,745.00SELEC TC513 Temperature Controller
SELEC TC513 Temperature Controller is an advanced auto-tuning PID controller or on/off controller with a selectable thermocouple, RTD up to two outputs. Forms are accessible with various hand-offs and SSR output.
Applications: Heat Treat/Oven, Packaging, Healthcare, HVAC, Food & Beverage
-
Selec TC518 Temperature Controller
Selec TC518 Temperature Controller is a PID/On-Off controller that can control various temperature-sensitive processes. It has a dual display that shows the current and set point temperatures. The controller also features various features, such as autotuning, alarming, and relay output.
Applications: Temperature & process indication, plastic molding/extrusion temperature monitoring, Heat treatment – furnace temperature monitoring, Chillers, Water heating boilers, Oven Control, Pressure/ Level/ Flow Monitoring.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters