-
₹6,825.00Dwyer 2015 Magnehelic® Differential Pressure Gauge
Dwyer 2015 Magnehelic® Differential Pressure Gauge is a device used to measure the difference in pressure between two points in a system. It is a mechanical gauge that uses a diaphragm and a magnet to indicate the difference in pressure on a scale. This Differential Pressure Gauge has a circular dial face that displays the pressure measurement in inches of the water column (in. WC).
Applications: HVAC systems, clean room environments, and laboratory testing. -
Dwyer 607-7 Differential Pressure Transmitter
Dwyer 607-7 Differential Pressure Transmitter converts positive, negative (vacuum) or differential pressures of clean, dry air, or other non-conductive, non-corrosive gases into a standard two-wire, 4-20 mA output signal. Dwyer 607-7 is highly resistant to overpressure, shock, and vibration. The 607-7 series is designed for use with air and other compatible gases, making it versatile in various industrial and laboratory settings.
Applications : HVAC Systems, Cleanroom Environments, Industrial Process Control, Dust Collection Systems, Aerospace Industry
-
₹85,020.00Dwyer A-396A Calibration Pump
Dwyer A-396A Calibration Pump is a device that designed to calibrate the Pressure Gauges, Transmitters or to set the Pressure Switches. This Pressure Calibrator Generates the pressure upto 72 psig (5 Bar). This Dwyer Calibrator Pump is the best solution for Calibration Labs to calibrate the Pressure related devices.
Applications: Used in Calibration Labs to Calibrate the Pressure Gauges, Pressure Transmitters and Pressure Switches. -
₹37,128.22Dwyer DPG-208 Digital Pressure Gauge
Dwyer DPG-208 Digital Pressure Gauge has a precise ±0.25% full-scale accuracy. This 4 digit digital display is used to reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages.
Applications: Level Control, Pump Control, Process Control, Compressor Control
-
₹14,596.00 – ₹19,929.00Dwyer® AVUL Series Air Velocity Transmitter
Dwyer®Air speed transmitter precisely measures airspeed or volumetric stream in magnificent or metric units. Synchronous current and voltage yields on all models give widespread contributions to observing gear while the yield range, units, and 0 to 5/10 VDC yield can be designed by means of neighborhood DIP switches.
Applications: VAV Systems, Building ducts
-
Keller High Temperature Pressure Transmitters Series 35X HTC
Keller High-Temperature Pressure Transmitters Series 35X HTC is a device used to measure the piezoresistive high-temperature transmitter that is appropriate for medium temperatures up to 300 °C. This Keller Transmitter is pressed on the flush diaphragm and transmitted through an oil-filled capillary and onto the silicon measuring cell. The Pressure Transmitter’s capillary serves as a cooling spiral, enabling media, temperatures as high as 300 °C. The PROG30 program may be used to read out the electronics’ temperature, which cannot be higher than 120 °C. KELLER provides pressure ports in a variety of materials for very aggressive media.
Applications: General industrial and OEM applications -
₹32,025.00 – ₹50,984.00Keller LEO2-Ei Digital Manometer
Keller LEO2-Ei Digital Manometer are provide high accuracy. The minimum or most value since the last reset can be displayed at a similar time because the current pressure value in a wide variety of units of pressure. The swivel adapter permits the device to be optimally positioned. Power is provided by a conventional CR2430 coin cell battery.
Applications: Industrial Applications, Servicing, Calibration / Testing.
-
₹421.73
Mextech DT-9 Pen Type Thermometer
Mextech DT-9 Pen Type Thermometer is accessible in a simple to peruse, quick reaction, signal alert thermometers. Our products comes with a one-hour auto stop highlight.
Applications: Food enterprises/part, drinking water analysis, Agriculture, Automobile, Brewing.
-
₹824.76
Mextech M-45 Digital AC Clamp Meter
An electrical meter with integral AC current clamp is known as a cinch meter, clamp on ammeter or tong analyzer. A clamp meter estimates the vector whole of the streams streaming in every one of the conductors going through the test, which relies upon the stage relationship of the flows. Just a single conductor is ordinarily gone through the test. Specifically, if the brace is shut around a two-conductor link conveying capacity to gear, similar current streams down one conductor and up the other; the meter accurately peruses a net current of zero
-
₹45,312.00Mextech SRT-6200 Surface Roughness Tester
Mextech SRT 6200 Surface Roughness Tester is widely used to measure surface roughness of various machinery-processed parts in production sites, etc. SRT 6200 calculates corresponding parameters as per selected measuring conditions and display all measurement parameters. The Roughness Tester sensor measures the surface roughness by the help of sharp built-in probe
Applications: Heavy industry, Aerospace, Surface metrology, manufacturing industries, etc. -
Mextech WA90A Water Activity Meter
Mextech WA90A Water Activity Meter empowers industries to optimize product quality, safety, and shelf-life by accurately measuring water activity. This Water Activity Measuring device has advanced features like an intuitive interface, and precise readings, the WA90A sets the benchmark for water activity analysis in various fields.
Applications: Food Industry, Pharmaceuticals, Cosmetics and Personal Care, Research and Development, etc.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters