-
₹3,010.00Metravi 1330 Digital Lux Meter
Metravi 1330 Digital Lux Meter is a device used to measure the amount of light present in workplaces. This digital light meter has an LCD with a low battery indication in it. It is easy to use with single function switch operating, lightweight, and pocket friendly
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹5,480.00Metravi 1333 Digital Lux Meter
Metravi 1333 Digital Lux Meter is a portable device used to measure the luminous flux per unit area with the help of a photodetector filter of one silicon photo diode and spectral response. It has a large LCD backlit display which helps the users to read easy
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹6,155.50Metravi 19 Super Digital TRMS Multimeter
Metravi 19 Super Digital TRMS Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure AC/DC voltage, AC/DC current, Resistance, Capacitance, Frequency (Electrical and Electronic), Duty Cycle, Diode test, Continuity plus Thermocouple Temperature.
Applications: -
Metravi AT500 Non-contact High Voltage Detector (Arm Type)
Metravi AT500 Non-contact High Voltage Detector is a device used to remind the electrical worker to
pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This High Voltage Detector can also be used for line fault
detection and electroscope.Applications: Electrical Installations, Power Distribution Systems, Industrial Machinery, HVAC Systems, Renewable Energy Systems, and Safety Inspections etc.
-
₹29,007.63Optex PT2LD Non-Contact Thermometer
Optex PT2LD Non-Contact Thermometer provides precision spot temperature measurement with a precise view of target spot with simultaneous digital display of temperature in the viewfinder, choice of operating and calculating modes, digital output.
Application: Transformer, Freezer/Refrigerator, Motor/Machine, etc.
-
Siemens QAA2061 Room Temperature Sensor
Siemens QAA2061 Room Temperature Sensor acquires the room temperature via its sensing element whose resistance value changes as a function of the temperature. This change is converted to a DC 0…10 V or 4…20 mA output signal, depending on the type of sensor. The output signal corresponds to the selected temperature range.
Applications: HVAC, Pharma companies, Hospitals, IT Companies, etc.
-
₹9,966.00 – ₹48,059.00Siemens QBM2030 30 Differential Pressure Sensor
Siemens QBM2030 30 Differential Pressure Sensor is used to measure the slightest differential pressure variation in ventilation and air conditioning ducts. This Siemens Pressure Sensor also Monitors filters and control fans with output available in the device. The siemens Pressure Sensor acquires differential, over and under the pressure of air and nonaggressive gases.
Applications: This pressure sensor is widely used in HVAC applications for measuring the difference between positive and negative pressure. Measuring the smallest differential weights in ventilation and cooling channels, Pharmaceutical Clean Rooms, and AHU applications Check wind streams, Monitor channels, and control fans
-
₹11,906.78 – ₹16,681.00Siemens QBM3020 Differential Pressure Sensor
Siemens QBM3020 Differential Pressure Sensor uses a diaphragm sensing element and provides high range pressure measurement with accuracy and an output of 4 to 20 mA. Available with switchable pressure-linear or extracting-the-root characteristic and digital display. With the extracting-the-root characteristic, the pressure measuring range is adjustable.
Applications: Measuring pressure in ventilation, Air conditioning ducts & Pressure supervision in labs, Checks air flows, HVAC, Control fans & Cleanrooms -
₹4,810.00Siemens QBM81-10 Differential Pressure Monitor
Siemens QBM81-10 Differential Pressure Monitor is used as a flow switch or filter monitor in air ducts. It is used for air and nonaggressive gases.
Applications: ventilation and air conditioning plants, air filters, airflow, fan belts, monitor the pressure in clean rooms, kitchens
-
₹12,906.00Siemens QFA 2060 Humidity Room Sensor
Siemens QFA2060D Humidity sensor and temperature sensor, with a display screen for relative humidity and temperature. The QFA2060D is used for the acquisition of relative temperature and humidity in heating and air conditioning facilities, it can also be used as a climate sensor, and as a measuring sensor for the construction of automation and control systems or signaling devices.
Applications: Residential and office buildings, production and manufacturing plants, Storerooms, Equipment cabinets, Testing environments
-
₹14,900.00Siemens QFA3160 Humidity and Temperature Sensor
Siemens QFA3160 Humidity and Temperature Sensor monitors and transmits the changes in humidity and temperature to the building control systems. Relative humidity and temperature in the QFA series are especially suitable for applications Where a specific and stable sensation of humidity is required.
Applications: Foodstuff, Medicine, Restaurant, Transportation, and industries by the HACCP system certification -
₹16,500.00 – ₹80,250.00Siemens QFA3160D Humidity Sensor
Siemens QFA3160D Humidity Sensor is intended for use in ventilation and air conditioning plants where high accuracy and short response times are required to measure relative humidity. The measurement range covers the entire humidity range from 0 to 100 %.
Applications: Foodstuff, Medicine, Restaurants, Transportation, Green House, Wine Yards, Indoor Swimming Pools , and industries by the HACCP system certification.
Translate