-
₹93,366.00Masibus UC12 Universal Calibrator
Masibus UC12 Universal Calibrator is compact, rugged, and easy to use. This Masibus is a handheld device with a graphical user interface for precise measurement and easy sourcing of electrical and physical parameters.
Applications: Drift test of Transmitters, Transducers, laboratory and Site calibration purpose, etc.
-
₹78,397.32Senko SP Secure H2 Gas Detector
Senko SP Secure H2 Gas Detector is designed to be suitable for leak detection of any gas piping and valves by equipping a built-in sampling pump. Since the measured gas concentration is displayed in the digital number, accurate measurement is possible.
Applications: Steelworks, Petrochemical plant, Shipbuilding yard, Sewage treatment plant, Mine, Power supply works, Hermetically sealed area (manhole, tank)
-
₹67,192.37
Senko SP12C7 Multi Gas Detector
Senko SP12C7 Multi-Gas Detector is a unified gas identifier measuring four (4) major gases, which result the greater part of the industrial accidents, to shield laborers from the disasters caused by the oxygen insufficiency, harmful gas harming and gas blast.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, control, organization, limited space work region.
-
₹41,359.21Senko SP Secure LPG And LNG Gas Detector
Senko SP Secure LPG And LNG Gas Detector is designed to be suitable for leak detection of any gas channeling and valves by preparing an implicit testing pump. Since the measured gas concentration is shown in the digital number, the exact measurement is possible.
Applications: Steelworks, Petrochemical plant, Shipbuilding yard, Sewage treatment plant, Mine, Power supply works, Hermetically-fixed territory (sewer vent, tank)
-
₹38,100.00BTH C9 Universal Process Calibrator
BTH C9 Universal Process Calibrator is a handy tool used to calibrate various types of process control instruments that accept mV, mA, and resistance inputs. The unique feature of this Multi-Function Calibrator is its high accuracy and stability.
Applications: Calibration of process control instruments, I/P convertors, Field-level transmitters, Flow transmitters, Temperature & pressure transmitters, etc. -
₹16,000.00BTH C10 Handheld Source Process Calibrator
BTH C10 Handheld Source Process Calibrator is handheld Process Calibrator is a very useful tool to calibrate process control instruments that accept Voltage/mA. The process calibrator has a source & measure function that can be used for lab or field calibration of process control instruments, temperature & pressure transmitters, and I/P converters. safety complies with IEC 1010
Applications: Process Control System Verification, Field Calibration of Portable Instruments, Research and Development etc.
-
Senko SI-100 LEL Fixed Gas Detector
Senko SI-100 LEL Fixed Gas Detector is a cutting-edge solution designed to elevate safety standards in industrial environments. This Fixed Gas Detector is easy to install and maintain. This Gas Detector is equipped with visual and audible alarms, it provides immediate alerts, and its integration capabilities allow seamless incorporation into existing safety systems.
Applications: Chemical plants, Oil and gas refineries, Power plants, Wastewater treatment facilities, Steelworks, Mining operations, etc. -
Masibus ICAL LC12 Analog Signal Generator
Masibus ICAL LC12 Analog Signal Generator is an ultimate loop calibrator used for sourcing, measuring, and simulating Loop current, mV, and V. It is a compact, rugged, and easy-to-use hand-held device with a graphical user interface. This LC 12 Signal Generator has simultaneous source and sense capability with independent parameter and range selection for source and sense. Masibus LC 12 Loop Calibrator is designed to provide a base accuracy of 0.02% reading in all modes of operation. This LC 12 Signal Generator comes with a Mini USB connector for charging, logged data retrieval, and firmware upgrade.
Applications: Calibration Lab, Process plant, Dairy plant, Cement Industries, Chemical Industries, Paper Industries, Engineering laboratories, Electronics Industries, etc.
-
Senko SI-100 Oxygen Gas Detector
Senko SI-100 Oxygen Gas Detector installed in a place where potential gas hazard exists to measure oxygen, toxic gas and combustible gas. It shows not only the concentration of gas but also diagnostic result of the unit itself through the LCD display and can be connected to the controller with a standard 4-20mA analog output communication or RS-485 digital communication.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
-
Senko SI-100 Carbon Dioxide Gas Detector
Senko SI-100 Carbon Dioxide Gas Detector typically finds its place in human-environmental related applications. It shows the concentration of CO2 in ppm levels and alerts users when the setpoints are violated. This senko gas detector has the capability of controlling an external motor, exhaust, etc. at user-defined set points. Other important feature includes 4-20mA output and optional communication of RS485 to integrate with BMS systems.
Applications: Workspace, Educational Institutions, Labs, Chemical & Bulk Drugs Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
-
Senko SI-100 Ammonia Gas Detector
Senko SI-100 Ammonia Gas Detector installed in a place where a potential gas hazard exists to measure Ammonia(lel). It not only shows the concentration of gas but also diagnostic results of the unit itself through the LCD display and can be connected to the controller with a standard 4-20mA analog output communication or RS-485 digital communication.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
-
Senko SI-100 Carbon Monoxide Gas Detector
Senko SI-100 Carbon Monoxide Gas Detector is a fixed type gas detector that gives continuous readings of carbon monoxide concentration in a particular area. The LCD display makes it easier for users to view the ppm levels locally. The instrument is also equipped with standard 4-20mA analog output communication or RS-485 digital communication for PLC/SCADA integration.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
Translate