-
₹144,542.37Drager X-plore® 8500 Powered Air-Purifying Respirator (PAPR)
Drager X-plore® 8500 Powered Air-Purifying Respirator (PAPR) as the most rugged and heavy-duty design with rubber protectors and high ingress protection (IP65) against dust and water jets from all directions. This PAPR has the latest Li-ion battery technology that provides power for at least 4 h (standard version) and 8 h (high-capacity version), respectively. The air inlets are protected from frontal moving debris, ensuring that sparks or water do not come into direct contact with the filter. It is ex-approved and can be used in ex-zones 1, 2, 21 and 22.
Applications: Pharmaceuticals, Chemical, Metalworking, Painting, Laboratories, etc.
-
₹168,740.00Drager X-plore® 8700 Ex-Proof Powered Air-Purifying Respirator (PAPR)
Drager X-plore® 8700 Ex-Proof Powered Air-Purifying Respirator (PAPR) is the most rugged and heavy-duty design with rubber protectors and high ingress protection (IP65) against the dust and water jets from all directions. This PAPR has the latest Li-ion battery technology that provides power for at least 4 hrs (standard version) and 8 hrs (high-capacity version), respectively. The air inlets are protected from frontal moving debris, ensuring that sparks or water do not come into direct contact with the filter. In work areas requiring explosion protection, the special Dräger X-plore 8700 provides optimal support. It is Ex-proof and can be used in ex-zones 1, 2, 21, and 22.
Applications: Pharmaceuticals, Chemical, Metalworking, Painting, Laboratories, etc. -
Dragino LHT65 LoRaWAN Temperature & Humidity sensor
Dragino LHT65 Temperature & Humidity sensor seems to be a long-range LoRaWAN sensor. It features a built-in SHT20 Humidity & Temperature sensor and an additional monitor for external sensors such as a compass, a soil humidity monitor, a tilting compass, etc.
Applications lorawan temperature humidity sensor: Irrigation systems, smart metering, smart cities, building automation.
-
Driesen DK8040 Data Logger with GPRS
Driesen DK8040 Data Logger with GPRS is a robust and flexible stationary data logger for measuring climate parameters. The loggers are battery-powered and store up readings on a memory card.
Applications: Water Balance Studies, Seepage Water Studies, Waste Water Management, Irrigation Control, Environmental Studies
-
₹1,055,561.44Durridge RAD7 Radon Detector
Durridge RAD7 Radon Detector is a portable detector that gauges radon and thoron concentrations in water, soil, and air. Usually used for vapor intrusion entry points and gushers, RAD7 can also be used to inspect soil or groundwater contagion.
Applications: professional radon testing, mitigators, mines, deserts, ocean, and volcanoes exploration. -
₹6,825.00Dwyer 2015 Magnehelic® Differential Pressure Gauge
Dwyer 2015 Magnehelic® Differential Pressure Gauge is a device used to measure the difference in pressure between two points in a system. It is a mechanical gauge that uses a diaphragm and a magnet to indicate the difference in pressure on a scale. This Differential Pressure Gauge has a circular dial face that displays the pressure measurement in inches of the water column (in. WC).
Applications: HVAC systems, clean room environments, and laboratory testing. -
Dwyer 400 Air Velocity Meter
Dwyer 400 Air Velocity Meter offers double purpose comfort High precision instrument and easy-to-read scale. Can be used to equilibrate. Air conditioning systems, air pressure drop calculation, and ventilator monitoring, and Blower discharge and pressure to inlet. The Series 400 kits include a Pitot tube, a manometer, needed tubing and connectors, red gauge fluid, and case carrier.
Applications: Air balancing, Building commissioning
-
₹41,803.81Dwyer 475-1-FM Mark III Handheld Digital Manometer
Dwyer 475-1-FM Mark III Handheld Digital Manometer tests positive, negative or differential pressures of air and natural gases, ranging from 0 to 20.00 “w.c. (4,982 kPa). Double push pads on the front panel switch on / off, auto-zero, and pressure sensor selection, enabling easy function with no set-up required. When used with the Dwyer Pitot tube, the Dwyer 4751FM can also be used.
Applications: Monitoring natural gas pressures on boilers and other combustion equipment, Air velocity monitoring, Field calibration of other instruments monitoring or troubleshooting HVAC systems
-
Dwyer 475-1-FM-AV Air Velocity Kit
Dwyer 475-1-FM-AV Air Velocity Kit all-in-one kit is thin, lightweight, and simple to use. Requires no setup or scaling. Digital manometer reads from 0-20.00 “w.c. with F.S. precision of ±0.5 percent and small divisions to 0.01. Wide 1/2” LCD readings are simple to be seen in dimly lit areas and have a “low battery” alert.
Applications: Field calibration of other instruments, Monitoring or troubleshooting HVAC systems.
-
Dwyer 476A Digital Manometer
Dwyer 476A Digital Manometer is a low-cost, high-reliability pressure measurement device. It is used to measure positive, negative, or differential pressures from -20 to 20 inches of water column (w.c.) with an accuracy of ±1.5% full scale. The 476A is easy to use and features a four-digit LCD display, zero function, and auto power off. It is constructed of an extruded aluminum case for exceptional durability.
Applications: Industrial automation, Calibration of pressure switches.
-
Dwyer 477AV-1 Handheld Digital Manometer
Dwyer 477AV-1 Handheld Digital Manometer measures pressure, flow, and velocity along with a number of other convenient features. The built-in air velocity and flow calculations provide accuracy and conserve time and error associated with manual calculations. Also featured on this unit are adjustable zero and span values for calibrating in the field, as well as a damping feature to compensate for the fluctuating readings.
Applications: Airflow monitoring, when used with a Dwyer® pitot tube
• Duct static pressure
• Commercial air balancing
• Building-zone pressure. -
Dwyer 607-7 Differential Pressure Transmitter
Dwyer 607-7 Differential Pressure Transmitter converts positive, negative (vacuum) or differential pressures of clean, dry air, or other non-conductive, non-corrosive gases into a standard two-wire, 4-20 mA output signal. Dwyer 607-7 is highly resistant to overpressure, shock, and vibration. The 607-7 series is designed for use with air and other compatible gases, making it versatile in various industrial and laboratory settings.
Applications : HVAC Systems, Cleanroom Environments, Industrial Process Control, Dust Collection Systems, Aerospace Industry
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters