• Placeholder
    3,712.71

    Meco 920P Temperature And Humidity Meter

    Brand:Meco

    Meco 920P Temperature And Humidity Meter is concerned and focused on the wise and effective utilization of the world’s assets particularly Power and Electricity. Client center, product innovation, ecological concern, and mechanical greatness are the prime worries of each part at MECO.

    Applications: In Humidity and temperature testing.

  • Placeholder
    2,875.42

    Meco 930P Digital Lux Meter

    Brand:Meco

    Meco 930P Digital Lux Meter is a light meter is a device used to measure luminescence lux per unit area. In other words, it’s a device used to measure the amount of light prevailing in a specific area.

    Applications: School, Labs, Office, Stadium, Theatres, Industrial, Laboratories, Illuminations, Solar panel, Lighting installation, and Indoor farming.

  • Meco 970P Sound Level Meter
    2,585.00

    Meco 970P Sound Level Meter

    Brand:Meco

    Meco 970P Sound Level Meter is used for acoustic (sound that travels through air) measurements. It is commonly a hand-held instrument with a microphone. The diaphragm of the microphone responds to changes in air pressure caused by sound waves. That is why the instrument is sometimes referred to as a Sound Pressure Level (SPL) Meter. This movement of the diaphragm, i.e. the sound pressure deviation (pascal Pa), is converted into an electrical signal (volts V).
    Applications: Noise at Work/Occupational Noise and Environmental and Community.

  • Placeholder
    1,966.52

    Meco 9A09 Digital Multimeter

    Brand:Meco

    A Digital Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance.

    Applications: Used to test electric circuits in electrical units, and industries…

  • Placeholder
    1,889.41

    Meco DIT-99C Digital Insulation Tester

    Brand:Meco

    The protection obstruction (IR) test (additionally usually known as a Megger) is a spot protection test which utilizes a connected DC voltage (commonly either 250Vdc, 500Vdc or 1,000Vdc for low voltage hardware <600V and 2,500Vdc and 5,000Vdc for high voltage gear) to gauge protection opposition in either kΩ, MΩ or Gω.

    Applications: Insulation Resistance Measurement of Electrical Equipment like Motors, Transformers, Machines, etc., Electrical Cables for Distribution Networks, for Communication Networks, House Hold Appliances (Washing Machines, Mixer, Toaster, etc.), Industrial, Commercial and Residential Installations.

  • Meco KM 6503 Food Thermometer

    Meco KM 6503 Food Thermometer

    Brand:Meco

    Meco KM 6503 Food Thermometer is a compact and easy-to-use digital thermometer that is ideal for measuring the temperature of food and beverages. It has a temperature range of -58°F to 572°F (-50°C to +300°C) and a resolution of 0.1°F (0.1°C). The thermometer features a large, easy-to-read display and a data hold function to lock the temperature reading on the screen.

    Applications: industrial kitchens, catering, restaurant chains, Food retail sector, and Supermarkets, while food is in transit.

  • Michell Easidew Online Dew Point Hygrometer

    Michell Easidew Online Dew Point Hygrometer

    Michell Easidew Online Dew Point Hygrometer is designed to measure the continuous measurement of dew point in the air. This Dew Point hygrometer is easy to install and supplied with 13-point calibration certificate. The application requires a to customize online system, we can specialized design and manufacturing capability according to cover your requirements.
    Applications : Controlled environments in glove boxes, Membrane dryers, Compressed air dryers, Breathing air safety and quality, Moisture in welding gases, Hydrogen cooled electricity generators, Inert and bulk gases, and Hazardous areas.

     

     

  • Placeholder
    29,007.63

    Optex PT2LD Non-Contact Thermometer

    Brand:Optex

    Optex PT2LD Non-Contact Thermometer provides precision spot temperature measurement with a precise view of target spot with simultaneous digital display of temperature in the viewfinder, choice of operating and calculating modes, digital output.

    Application: Transformer, Freezer/Refrigerator, Motor/Machine, etc.

  • Ace-Instruments-NS10LT-Fixed-Infrared-Thermometer
    94,344.00104,970.00

    Optex SA-80T2A Non Contact Infrared Temperature Transmitter

    Brand:Optex

    Optex SA-80T2A Non Contact Infrared Temperature Transmitter detects and converts the amount of infrared energy into a temperature value. Because the method is non-contact, it enables quick and easy measurement of the target temperature from a safe distance. It converts the temperature measured to an analog 4-20mA Output Signal.

    Applications: Air economizers, Outdoor temperature and relative humidity reference, Pool room humidity monitoring.

  • Auto PDF Temperature Data Logger
    1,280.00

    Pharma Temperature Data logger

    Brand:Tempnote

    Pharma Temperature Datalogger also is known as Tempnote Lite Data Logger is used to measure and record temperature values and disposable temperature data logger which has 16000 record values. An internal sensor present in this data logger helps inaccurate temperature measurements.
    Applications: Biolabs, Cold chain logistics, Food & dairy, Lifesciences, Pharmaceuticals, etc.

  • Shinyei OMX Series Handheld Odor Meter

    Shinyei OMX Series Handheld Odor Meter

    Brand:Shinyei

    Shinyei OMX Series Handheld Odor Meter is a specified tool for the Odor analysis. It Indicates the relative strength and odor classification numerically by comparing odor gas and purified air. The values shown on display are calculated based on the original principle.

    Application: Agriculture, Chemical manufacturing, Cosmetics manufacturing, Pharmaceutical manufacturing, Waste management

  • Tempnote Lite Single Use Temperature Datalogger
    1,355.00

    Tempnote Lite Single Use Temperature Data Logger

    Brand:Tempnote

    Tempnote Lite Single Use Temperature Data Logger is proposed for cold chain monitoring during transit. This Temperature Datalogger is designed with inbuilt USB and Plug-N-Play highlights for auto-recovering PDF reports without requiring extra hardware or programming.
    Applications: Vaccine freezer, Marine ships, Food industries, Cold chains, Refer ships, etc.

Translate

Main Menu