-
₹2,275.00
Meco 72T-Auto Digital AC Clamp Meter
Meco 72T-Auto Digital AC Clamp Meter, An electrical meter with essential AC current clamp is known as a clamp meter, clamp-on ammeter, or tong tester. It is mostly used by commercial and residential electricians.
Applications: Laboratories and Industrial Applications, Calibration Services.
-
₹2,770.77
Meco 801 Auto Digital Multimeter
Meco 801 Auto Digital Multimeter is used to measure AC/DC Current, AC/DC Voltage, Capacitance, Duty Cycle, Frequency, Resistance, Temperature with buzzer, and Auto on/off feature.
Applications: For Temperature and Environmental Applications: Low-cost weather station. For Voltage Measurements: High and low-value DC measurement, for Current Measurements, for Resistance Measurement, for Time and Frequency measurement -
₹3,712.71
Meco 920P Temperature And Humidity Meter
Meco 920P Temperature And Humidity Meter is concerned and focused on the wise and effective utilization of the world’s assets particularly Power and Electricity. Client center, product innovation, ecological concern, and mechanical greatness are the prime worries of each part at MECO.
Applications: In Humidity and temperature testing.
-
₹2,875.42
Meco 930P Digital Lux Meter
Meco 930P Digital Lux Meter is a light meter is a device used to measure luminescence lux per unit area. In other words, it’s a device used to measure the amount of light prevailing in a specific area.
Applications: School, Labs, Office, Stadium, Theatres, Industrial, Laboratories, Illuminations, Solar panel, Lighting installation, and Indoor farming.
-
₹2,585.00
Meco 970P Sound Level Meter
Meco 970P Sound Level Meter is used for acoustic (sound that travels through air) measurements. It is commonly a hand-held instrument with a microphone. The diaphragm of the microphone responds to changes in air pressure caused by sound waves. That is why the instrument is sometimes referred to as a Sound Pressure Level (SPL) Meter. This movement of the diaphragm, i.e. the sound pressure deviation (pascal Pa), is converted into an electrical signal (volts V).
Applications: Noise at Work/Occupational Noise and Environmental and Community. -
₹1,966.52
Meco 9A09 Digital Multimeter
A Digital Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance.
Applications: Used to test electric circuits in electrical units, and industries…
-
₹1,889.41
Meco DIT-99C Digital Insulation Tester
The protection obstruction (IR) test (additionally usually known as a Megger) is a spot protection test which utilizes a connected DC voltage (commonly either 250Vdc, 500Vdc or 1,000Vdc for low voltage hardware <600V and 2,500Vdc and 5,000Vdc for high voltage gear) to gauge protection opposition in either kΩ, MΩ or Gω.
Applications: Insulation Resistance Measurement of Electrical Equipment like Motors, Transformers, Machines, etc., Electrical Cables for Distribution Networks, for Communication Networks, House Hold Appliances (Washing Machines, Mixer, Toaster, etc.), Industrial, Commercial and Residential Installations.
-
Meco KM 6503 Food Thermometer
Meco KM 6503 Food Thermometer is a compact and easy-to-use digital thermometer that is ideal for measuring the temperature of food and beverages. It has a temperature range of -58°F to 572°F (-50°C to +300°C) and a resolution of 0.1°F (0.1°C). The thermometer features a large, easy-to-read display and a data hold function to lock the temperature reading on the screen.
Applications: industrial kitchens, catering, restaurant chains, Food retail sector, and Supermarkets, while food is in transit.
-
MSR MA-3-2089-X-F Ethylene Analog Transmitter
MSR Ethylene (C2H4) Analog transmitter is for monitoring of gas and vapors in the ambient air. It is used for cold storage, ripening chamber, refrigerant vehicles, etc. The μ-Gard analog transmitter series MA is a reliable gas detector.
Applications : industry, agriculture, and other areas requiring precise measurement of ethylene concentration.
-
MSR Sensitron Fixed Acetylene Gas Sensor Transmitter
MSR Sensitron Fixed Acetylene Gas Sensor Transmitter is a microprocessor-based analog gas transmitter with a 4 – 20 mA output signal for monitoring the ambient air and detecting flammable gases and vapors in the lower explosion level (LEL) by means of a catalytic sensor (pellistor). The calibration for types without LCD display is possible via the handheld calibration keypad XT.S/CKD.
Applications: Industrial applications.
-
₹567,840.00
PCE 430 Class 1 Sound Level Meter
PCE 430 Class 1 Sound Level Meter is a Portable high-accuracy decibel meter that comes with a 1/1 octave band filter. This Portable Sound Level Meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real-time. This handheld meter also functions as a data logger, recording measurements at an adjustable interval from 1 Sec to 24 Hours and storing the recorded measurement data in a micro SD card memory. The SD card can be removed from this meter and inserted into the SD card reader of a PC. There is an excellent feature of this decibel meter is that can be connected directly to a PC via a USB Slot. This provided PC-friendly software allows for fast and easy data analysis. This device measures from 22 to 136 dB(A) at a frequency of 3 Hz to 20 kHz.
Applications: Airports, Industrial companies, workplaces, Construction Sites, In Traffic Areas, Regulation Departments, etc. -
PCE HWA-30 Hot Wire Anemometer
PCE HWA-30 Hot Wire Anemometer is designed to measure the volume flow and the ambient temperature. This HWA-30 Hot Wire Anemometer can measure the range of the hot wire anemometer between 0.3 to 30.0 m/s or 0.98 to 98.4 ft/s. This Hot Wire Anemometer stores the integrated data, memory has up to 960 records, and the software can measure the value with a thermometer.
Translate