Search Results for "co2 sensor "
-
E+E Elektronik EE820 CO2 Sensor for Demanding Applications
E+E-EE820 CO2 Sensor ensures precise CO2 measurements through a multiple-point CO2 and temperature factory adjustment procedure. Exceptional accuracy across the entire temperature working range. E+E dual-wavelength NDIR CO2 sensor, the EE820 compensates for ageing effects and maintains high resistance to pollution. This technology provides outstanding long-term stability, ensuring reliable and consistent performance over time.
Applications : Hatchers, incubators, livestock barns, and greenhouses.
-
₹45,505.00Metravi PM 29 Digital Process Meter(DMM+CALIBRATOR)
Metravi PM 29 Digital Process Meter/Calibrator is a Process Calibrator cum Multimeter used to measure and source various parameters like AC/DC Current, AC Voltage, Frequency, RTD measurements, diode, and continuity testing with IEC 61010 rating.
Applications: Electrical and electronics industries, to verify test installations and instrumentation.
-
Extech CO210 Desktop Indoor Air Quality CO2 Monitor
Extech CO210 Desktop Indoor Air Quality CO2 Monitor is a device designed to measure indoor air quality parameters like temperature, humidity and Co2. This Indoor Air Quality Indicator ranges the Co2 upto 9,999 PPM. This Table Top IAQ Monitor alerts the user when the readings get violates. This Co2 Monitor comes with a AC adaptor, software and cable. It has an advanced feature to record the maximum and minimum readings of co2.
Applications: Office buildings, schools, greenhouses, factories, hotels, hospitals
-
E+E Elektronik EE850 CO2, Humidity and Temperature Duct Sensor
E+E-EE 850 temperature humidity co2 duct sensor designed to provide accurate measurements of CO2 levels, relative humidity (RH), and temperature (T) in various applications, particularly in demand-controlled ventilation and building automation systems..This Temperature Humidity Sensor functional design installing it into a duct, where a controlled amount of air flows through the divided probe to reach the CO2 sensing cell inside the transmitter enclosure.
Applications : Building automation , HVAC Systems, Clean Rooms , Greenhouses , Commercial Buildings
-
₹18,502.00CEM DT 802 CO2 Air Quality Monitor
CEM DT 802 CO2 Air Quality Monitor is designed for air quality control and health control by measuring Carbon Dioxide (CO2) levels in areas where it needs to be monitored. This Co2 monitor helps in monitoring along with the visible and audible CO2 alarm.
Applications: Factory, schools, offices, transportation lines, etc. -
E+E Elektronik EE8915 CO2 Sensor for Railway Applications
EE8915 CO2 Sensor for Railway confirms with applicable railway standards and measures CO2 concentration in a reliable manner even in harsh environments. The optimal CO2 measurement accuracy is achieved by active compensation using on-board sensors, regardless of temperature, altitude, or weather. The CO2 sensor can be mounted on walls or ducts. The voltage and current output signals contain the CO2 measured data.
Applications: Building ventilation control, industrial applications, air quality monitoring, transportation.
-
MSR MC2 CO2 Gas Sensor Transmitter
In addition with MSR MC2 CO2 sensor element with infrared sensor there is a module integrated in the sensor unit with µController, analog output and power supply. The IR measurement principle with integrated temperature compensation ensures highest accuracy, selectivity and reliability despite the long calibration interval.
-
₹25,350.00Siemens QPM2100 Carbon dioxide duct sensor
Siemens QPM2100 Carbon dioxide duct sensor optimizes room comfort by allowing for demand-controlled ventilation. The sensors may acquire concentrations of CO2 and volatile organic compounds ( VOC), relative humidity, and temperature. The sensor assesses concentrations of CO2 / VOC and transforms it into a linearly proportional output signal of 0 to 10 Vdc. A capacitive wetness sensing element changes capacitance as a function of relative humidity for models with humidity.
Application: ventilation, air conditioning conference rooms, auditoriums and office spaces.
-
₹20,000.00Ace AI-CO2-P1 Portable CO2 Detector
Ace AI-CO2-P1 Portable CO2 Detector measures the indoor air quality index including the CO2 concentration level, air temperature, dew point, wet bulb temperature, and humidity. The Carbon Dioxide output value readings are fed to the PC for online analysis. The CO2 sensor can be calibrated easily in fresh air, and also the RH sensor is calibrated with AZ 33%/75% salt bottle.
Applications: Public areas such as offices, Classrooms, Factories, Hospitals, Workspaces, Residential, Commercial Buildings, and Hotels. -
₹12,906.00Siemens QFA 2060 Humidity Room Sensor
Siemens QFA2060D Humidity sensor and temperature sensor, with a display screen for relative humidity and temperature. The QFA2060D is used for the acquisition of relative temperature and humidity in heating and air conditioning facilities, it can also be used as a climate sensor, and as a measuring sensor for the construction of automation and control systems or signaling devices.
Applications: Residential and office buildings, production and manufacturing plants, Storerooms, Equipment cabinets, Testing environments
-
₹7,210.00Ace Duct Mount Temperature Humidity Sensor
ACE AI-RHTx-D Duct Mounted Temperature and Humidity Sensor is an accurate & stable sensor with a dual output of 4-20mA. The capacitive basic sensor will not affect the condensation and it gives top-of-the-line long-term stability.
Applications: Building Air conditioning (Ducts & AHU), Meteorological observation, Industrial Applications. -
MSR MC2 NH3 Gas Sensor Transmitter
MSR MC2 PH3 Gas Sensor Transmitter houses a module with µController, analog output and power supply in addition to the electrochemical sensor element including amplifier. The µController calculates a linear 4 – 20 mA (or 2 – 10 V) signal out of the measurement signal and also stores all relevant measured values and data of the sensor element.
Applications:
The µGard®2 Sensor MC2 is used for the detection of toxic gases or for oxygen monitoring wherever a typical 4 – 20 mA (or 2 – 10 V) signal is required.