-
Keller High Temperature Pressure Transmitters Series 35X HTC
Keller High-Temperature Pressure Transmitters Series 35X HTC is a device used to measure the piezoresistive high-temperature transmitter that is appropriate for medium temperatures up to 300 °C. This Keller Transmitter is pressed on the flush diaphragm and transmitted through an oil-filled capillary and onto the silicon measuring cell. The Pressure Transmitter’s capillary serves as a cooling spiral, enabling media, temperatures as high as 300 °C. The PROG30 program may be used to read out the electronics’ temperature, which cannot be higher than 120 °C. KELLER provides pressure ports in a variety of materials for very aggressive media.
Applications: General industrial and OEM applications -
₹32,025.00 – ₹50,984.00
Keller LEO2-Ei Digital Manometer
Keller LEO2-Ei Digital Manometer are provide high accuracy. The minimum or most value since the last reset can be displayed at a similar time because the current pressure value in a wide variety of units of pressure. The swivel adapter permits the device to be optimally positioned. Power is provided by a conventional CR2430 coin cell battery.
Applications: Industrial Applications, Servicing, Calibration / Testing.
-
₹3,010.00
Metravi 1330 Digital Lux Meter
Metravi 1330 Digital Lux Meter is a device used to measure the amount of light present in workplaces. This digital light meter has an LCD with a low battery indication in it. It is easy to use with single function switch operating, lightweight, and pocket friendly
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹5,480.00
Metravi 1333 Digital Lux Meter
Metravi 1333 Digital Lux Meter is a portable device used to measure the luminous flux per unit area with the help of a photodetector filter of one silicon photo diode and spectral response. It has a large LCD backlit display which helps the users to read easy
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹6,155.50
Metravi 19 Super Digital TRMS Multimeter
Metravi 19 Super Digital TRMS Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure AC/DC voltage, AC/DC current, Resistance, Capacitance, Frequency (Electrical and Electronic), Duty Cycle, Diode test, Continuity plus Thermocouple Temperature.
Applications: -
Metravi AT500 Non-contact High Voltage Detector (Arm Type)
Metravi AT500 Non-contact High Voltage Detector is a device used to remind the electrical worker to
pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This High Voltage Detector can also be used for line fault
detection and electroscope.Applications: Electrical Installations, Power Distribution Systems, Industrial Machinery, HVAC Systems, Renewable Energy Systems, and Safety Inspections etc.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters