-
Keller High Temperature Pressure Transmitters Series 35X HTC
Keller High-Temperature Pressure Transmitters Series 35X HTC is a device used to measure the piezoresistive high-temperature transmitter that is appropriate for medium temperatures up to 300 °C. This Keller Transmitter is pressed on the flush diaphragm and transmitted through an oil-filled capillary and onto the silicon measuring cell. The Pressure Transmitter’s capillary serves as a cooling spiral, enabling media, temperatures as high as 300 °C. The PROG30 program may be used to read out the electronics’ temperature, which cannot be higher than 120 °C. KELLER provides pressure ports in a variety of materials for very aggressive media.
Applications: General industrial and OEM applications -
₹32,025.00 – ₹50,984.00Keller LEO2-Ei Digital Manometer
Keller LEO2-Ei Digital Manometer are provide high accuracy. The minimum or most value since the last reset can be displayed at a similar time because the current pressure value in a wide variety of units of pressure. The swivel adapter permits the device to be optimally positioned. Power is provided by a conventional CR2430 coin cell battery.
Applications: Industrial Applications, Servicing, Calibration / Testing.
-
₹3,010.00Metravi 1330 Digital Lux Meter
Metravi 1330 Digital Lux Meter is a device used to measure the amount of light present in workplaces. This digital light meter has an LCD with a low battery indication in it. It is easy to use with single function switch operating, lightweight, and pocket friendly
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹5,480.00Metravi 1333 Digital Lux Meter
Metravi 1333 Digital Lux Meter is a portable device used to measure the luminous flux per unit area with the help of a photodetector filter of one silicon photo diode and spectral response. It has a large LCD backlit display which helps the users to read easy
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹6,155.50Metravi 19 Super Digital TRMS Multimeter
Metravi 19 Super Digital TRMS Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure AC/DC voltage, AC/DC current, Resistance, Capacitance, Frequency (Electrical and Electronic), Duty Cycle, Diode test, Continuity plus Thermocouple Temperature.
Applications: -
Metravi AT500 Non-contact High Voltage Detector (Arm Type)
Metravi AT500 Non-contact High Voltage Detector is a device used to remind the electrical worker to
pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This High Voltage Detector can also be used for line fault
detection and electroscope.Applications: Electrical Installations, Power Distribution Systems, Industrial Machinery, HVAC Systems, Renewable Energy Systems, and Safety Inspections etc.
-
Senko SI-100 Ammonia Gas Detector
Senko SI-100 Ammonia Gas Detector installed in a place where a potential gas hazard exists to measure Ammonia(lel). It not only shows the concentration of gas but also diagnostic results of the unit itself through the LCD display and can be connected to the controller with a standard 4-20mA analog output communication or RS-485 digital communication.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
-
Senko SI-100 Carbon Dioxide Gas Detector
Senko SI-100 Carbon Dioxide Gas Detector typically finds its place in human-environmental related applications. It shows the concentration of CO2 in ppm levels and alerts users when the setpoints are violated. This senko gas detector has the capability of controlling an external motor, exhaust, etc. at user-defined set points. Other important feature includes 4-20mA output and optional communication of RS485 to integrate with BMS systems.
Applications: Workspace, Educational Institutions, Labs, Chemical & Bulk Drugs Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
-
Senko SI-100 Carbon Monoxide Gas Detector
Senko SI-100 Carbon Monoxide Gas Detector is a fixed type gas detector that gives continuous readings of carbon monoxide concentration in a particular area. The LCD display makes it easier for users to view the ppm levels locally. The instrument is also equipped with standard 4-20mA analog output communication or RS-485 digital communication for PLC/SCADA integration.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
-
Senko SI-100 Hydrogen Sulfide Gas Detector
Senko SI-100 Hydrogen Sulphide Gas Detector displays the concentration of the H2S level with continuous readings on the LCD display. This Senko H2S detector Detector is well equipped to be used in Flameproof areas with all global approvals. The Instrument can be connected to PLC/SCADA with RS485 or 4-20mA output option.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency. -
Senko SI-100 Oxygen Gas Detector
Senko SI-100 Oxygen Gas Detector installed in a place where potential gas hazard exists to measure oxygen, toxic gas and combustible gas. It shows not only the concentration of gas but also diagnostic result of the unit itself through the LCD display and can be connected to the controller with a standard 4-20mA analog output communication or RS-485 digital communication.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
-
₹78,397.32Senko SP Secure H2 Gas Detector
Senko SP Secure H2 Gas Detector is designed to be suitable for leak detection of any gas piping and valves by equipping a built-in sampling pump. Since the measured gas concentration is displayed in the digital number, accurate measurement is possible.
Applications: Steelworks, Petrochemical plant, Shipbuilding yard, Sewage treatment plant, Mine, Power supply works, Hermetically sealed area (manhole, tank)
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters