-
Selec TC518 Temperature Controller
Selec TC518 Temperature Controller is a PID/On-Off controller that can control various temperature-sensitive processes. It has a dual display that shows the current and set point temperatures. The controller also features various features, such as autotuning, alarming, and relay output.
Applications: Temperature & process indication, plastic molding/extrusion temperature monitoring, Heat treatment – furnace temperature monitoring, Chillers, Water heating boilers, Oven Control, Pressure/ Level/ Flow Monitoring.
-
₹56,640.00Dew Point Transmitter with Controller
Dew Point Transmitter with Controller is a cutting-edge, state-of-the-art solution designed to accurately measure and control moisture levels in various industrial processes and applications. Built with the latest sensor technology and advanced control capabilities, this innovative device ensures optimal performance, increased efficiency, and enhanced process reliability across industries.
Applications: Compressed air systems, Plastic dryers, HVAC, Industrial drying processes etc. -
₹3,829.00Selec PID 528 Digital PID Temperature Controller
Selec PID 518 temperature controller is a device widely recognized as an on/off controller, are sophisticated, 4-digit auto-tuning controls with up to 3 outputs equipped for temperature control or process control across a wide range of industrial applications. The controllers can be powered by a set of PT100 (RTD) thermocouples or 2/3 wire input sensors, or by a process signal of millivolt, 0-5Vdc, 0-10Vdc, or 0/4-20mA. There are models with relay, SSR, or analogue outputs that can be set up as one on/off or PID control, up to two on/off or PID controls, and one alarm output.
Applications: Temperature & process indication, Plastics moulding/extrusion temperature monitoring, Heat treatment – furnace temperature monitoring, Chillers, Water heating boilers, Oven Control, Pressure/ Level/ Flow Monitoring.
-
₹65,450.00E+E EE75 Air and Gas Velocity Sensor
E+E EE75 Air and Gas Velocity Sensor is a high-accuracy air and gas velocity sensor that uses a hot film anemometer principle. It is designed for use in harsh industrial environments and can measure velocities from 0 to 40 m/s. The sensor is also temperature compensated, so it can be used in applications with temperatures ranging from -40 to 120°C.
Applications: Exhaust systems, Laminar flow control, HVAC systems. -
E+E Elektronik EE364 Moisture in Oil Sensor
E+E Elektronik EE364 Moisture in Oil Sensor is a compact oil sensor that is designed for reliable online monitoring of the moisture in transformer, engine, lubrication, or hydraulic oil as well as in diesel fuel. Besides the accurate measurement of water activity (aw) and temperature (T), this Oil Moisture Sensor calculates the absolute water content (x) of the oil in ppm. This Moisture Sensor employs high-end E+E humidity sensing elements that have outstanding long-term stability and high resistance to pollution. This Device is small in size and its robust stainless steel enclosure, together with the choice of process connections allows easy and space-saving installation. The aw, T and x measured data is available on two freely configurable 4 – 20 mA analog outputs and on the RS485 interface with Modbus RTU protocol.
Applications: Transformers, engine, lubrication, hydraulic oil as well as diesel or fuel, etc.
-
E+E Elektronik EE8915 CO2 Sensor for Railway Applications
EE8915 CO2 Sensor for Railway confirms with applicable railway standards and measures CO2 concentration in a reliable manner even in harsh environments. The optimal CO2 measurement accuracy is achieved by active compensation using on-board sensors, regardless of temperature, altitude, or weather. The CO2 sensor can be mounted on walls or ducts. The voltage and current output signals contain the CO2 measured data.
Applications: Building ventilation control, industrial applications, air quality monitoring, transportation.
-
E+E Elektronik EE850 CO2, Humidity and Temperature Duct Sensor
E+E-EE 850 temperature humidity co2 duct sensor designed to provide accurate measurements of CO2 levels, relative humidity (RH), and temperature (T) in various applications, particularly in demand-controlled ventilation and building automation systems..This Temperature Humidity Sensor functional design installing it into a duct, where a controlled amount of air flows through the divided probe to reach the CO2 sensing cell inside the transmitter enclosure.
Applications : Building automation , HVAC Systems, Clean Rooms , Greenhouses , Commercial Buildings
-
E+E Elektronik EE820 CO2 Sensor for Demanding Applications
E+E-EE820 CO2 Sensor ensures precise CO2 measurements through a multiple-point CO2 and temperature factory adjustment procedure. Exceptional accuracy across the entire temperature working range. E+E dual-wavelength NDIR CO2 sensor, the EE820 compensates for ageing effects and maintains high resistance to pollution. This technology provides outstanding long-term stability, ensuring reliable and consistent performance over time.
Applications : Hatchers, incubators, livestock barns, and greenhouses.
-
E+E Elektronik EE576 Probe for Very Low Air Velocity
E+E Elektronik EE576 Probe for Very Low Air Velocity is specifically designed for measuring the accurate low air velocity which is ideal for applications such as laminar flow control or filter monitoring. This Air Velocity Probe operates on the hot-film anemometer principle.
Applications : HVAC Systems , Clean Air Cabinets, filter monitoring Environmental Monitoring, laminar flow control, laminar flow control, filter monitoring
-
E+E Elektronik EE650 Air Velocity Transmitter for HVAC
E+E Elektronik EE650 Air Velocity Transmitter for HVAC is designed for accurate and dependable air velocity measurement. This is a device that makes use of a cutting-edge thin-film air velocity sensing element made by E+E that works on the same principles as a thermal anemometer. This Air Velocity Sensor makes fast and simple installation possible by the enclosure design and the mounting edge that is part of the supply scope.
Applications: Building Automation, HVAC (heating, ventilation, and Air conditioning) Ventilation control, Ventilation systems, Process control.
-
E+E Elektronik EE660 Low Air Velocity Sensor
E+E Elektronik EE660 Low Air Velocity Sensor designed specifically for clean rooms and applications requiring precise measurement of very low air velocity, such as laminar flow control. This Air Velocity Sensor operates the hot film anemometer and the measured data is available as current and voltage outputs. This Air Velocity Sensor allows for user configuration through jumpers via software.
Applications: ventilation application, clean rooms, laminar floor monitoring, building automation, HVAC systems, Laboratories, Museums and Archives, Greenhouses
-
E+E Elektronik EE471 Temperature Sensor with Remote Probe
E+E Elektronik EE471 Temperature Sensor with Remote Probe is designed for measuring temperature in specific applications where the sensor needs to be placed at a distance from the point of measurement. This Temperature Sensor with Remote Probe feature allows for flexibility in positioning the sensor in environments where direct contact may not be feasible or safe. This Temperature Sensor typically have a specified level of good accuracy.
Applications : Building automation, HVAC systems, Environmental Monitoring , process control , Laboratories, etc.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters
