-
SELEC TC221 Temperature Controller
SELEC TC221 Temperature Controller is a sophisticated auto-tuning PID controller or on/off controller with the selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs.
Applications: Furnaces, ceramic kilns, boilers, and heat exchangers, Packaging, Plastics, Healthcare, Food & Beverage.
-
Tempsen Alpha TH-30 Data Logger
Tempsen Alpha TH-30 Data Logger is a blend of engineering and design philosophy. It is a very compact device to measure accurate temperature and humidity for a wide variety of applications like shipment, dry ice delivery, cryo containers to refrigerators, freezers, laboratories, and warehouses. Enabling you to do reliable and precise monitoring and fast data output with automatically encrypted PDF report, with no software required for downloading data.
Applications: shipment, dry ice delivery, cryo containers to refrigerators, freezers, laboratories, and warehouses old chain monitoring.
-
₹1,829.00Selec TC303 Temperature Controller
Selec TC303 Temperature Controller is an auto-tuning PID temperature controller with the selectable thermocouple, RTD up to two outputs. This Selec temperature controller can be configured as on/off or PID control and alarm outputs.
Application: Jacketed pans, Tracer lines, Tanks, Acid baths, Hot water storage calorifiers, Heater batteries, Unit heaters. -
Sensitech TempTale TT4 Temperature Datalogger(Discontinued Model, Contact Store for another model)
Sensitech TempTale TT4 Temperature Datalogger is the industry’s most trusted reliable and accurate electronic monitor for Monitoring the temperature of temperature-sensitive products like Ice Cream, Fresh Fruit, dairy products, Meats, etc. The time and temperature data are displayed in the LCD display that helps to take crucial quick and easy.
Application: Cold chains, Food Storage, etc. -
Tempsen Alpha TUX Ultra Low Temperature USB PDF Data Logger
Tempsen Alpha TUX Dry Ice USB PDF Data Logger designed to operate and record temperature data within shipments of dry ice. A probe less data logger has an integral temperature sensor, enabling the user to simply place the device into a container of dry ice. An alternative would comprise of a probe, cable run and an external data logger placed in ambient temperature conditions. Using an externally mounted temperature data logger can take longer to install and render the probe and data logger prone to damage due to its position on the outside of the insulated shipping container.
-
Metravi AVD-80 Portable Vibration Meter
Metravi AVD-80 Portable Vibration Meter is a digital vibration meter. The device is simply a pocket-sized and lightweight device, and it has a backlight display. and an automatic option for power ON/OFF. Low battery warning with text. Pocket-sized and light. It measures velocity, acceleration, and displacement. suitable for monitoring machinery vibration caused by imbalance, misalignment, and gear faults. microcontroller based.
Applications: Predictive Maintenance, Machinery Condition Monitoring, Quality Control, Shaft Alignment, Unbalance Detection.
-
Greystone CMD5B4000 MOD Carbon Monoxide Detector
Greystone CMD5B4000 MOD Carbon Monoxide Detector is a device used to monitor the carbon monoxide levels and output of a field selectable 4-20mA or voltage signal using the electrochemical sensor. The voltage signal may be set to 0-50 or 0-10 Vdc. Through the on-board menu, the sensing range and output can be increased to 100, 150, 300, 400, or 500 ppm.
Applications: Pharmaceutical Clean Rooms, HVAC, Laminar Air Flow Cabinets, and Biosafety Cabinets.
-
Metravi CTG-02 Coating Thickness Gauge
Metravi CTG-02 Coating thickness gauge is suitable for laboratory, Workshop and Outdoor use. This probe can work on both principles, Magnetic Induction and on the eddy current principle. one probe is required for coating measurement both on ferrous and non-ferrous metal substrates.
Applications: Paint shops, Automobile, Ship building, Aircraft industries.
-
Metravi AT500 Non-contact High Voltage Detector (Arm Type)
Metravi AT500 Non-contact High Voltage Detector is a device used to remind the electrical worker to
pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This High Voltage Detector can also be used for line fault
detection and electroscope.Applications: Electrical Installations, Power Distribution Systems, Industrial Machinery, HVAC Systems, Renewable Energy Systems, and Safety Inspections etc.
-
Metravi WT500 Non-Contact High-Voltage Detector
The Metravi WT500 Non-Contact high-voltage detector serves as a safety companion for electrical workers, gently nudging them to prioritize safety and avert high-voltage electric shock incidents. When the operator dons the device and approaches a high-voltage source within a specific range, it promptly triggers both audible and visual alarms, calibrated to the safety distance corresponding to the voltage level in question. Furthermore, this versatile instrument can double as a tool for identifying line faults and as an electroscope, broadening its utility in the electrical field.
Applications: Electrical Maintenance and Testing, Safety Precautions, Line Fault Detection, Industrial and Manufacturing Settings.
-
Metravi CET-05 Clamp On Ground Resistance Tester
Metravi CET-05 Clamp on Ground Resistance Tester is a state of the art instrument designed to simplify and enhance ground resistance measurements in various electrical systems and installations. The CET-05 is equipped with a clamp-on design, allowing users to measure ground resistance without the need for ground rods or disconnecting the grounding system. This feature makes it exceptionally convenient for both routine maintenance and troubleshooting.
Applications: Electrical Substations, Industrial Plants, Commercial Buildings, Telecommunications Facilities.
-
Selec TC518 Temperature Controller
Selec TC518 Temperature Controller is a PID/On-Off controller that can control various temperature-sensitive processes. It has a dual display that shows the current and set point temperatures. The controller also features various features, such as autotuning, alarming, and relay output.
Applications: Temperature & process indication, plastic molding/extrusion temperature monitoring, Heat treatment – furnace temperature monitoring, Chillers, Water heating boilers, Oven Control, Pressure/ Level/ Flow Monitoring.
Translate