-
Keller High Temperature Pressure Transmitters Series 35X HTC
Keller High-Temperature Pressure Transmitters Series 35X HTC is a device used to measure the piezoresistive high-temperature transmitter that is appropriate for medium temperatures up to 300 °C. This Keller Transmitter is pressed on the flush diaphragm and transmitted through an oil-filled capillary and onto the silicon measuring cell. The Pressure Transmitter’s capillary serves as a cooling spiral, enabling media, temperatures as high as 300 °C. The PROG30 program may be used to read out the electronics’ temperature, which cannot be higher than 120 °C. KELLER provides pressure ports in a variety of materials for very aggressive media.
Applications: General industrial and OEM applications -
₹30,500.00 – ₹55,640.00
Keller LEO2 Digital Pressure Gauge
Keller LEO2 Digital Pressure Gauge is a compact, Controlled Microprocessor, highly accurate, and versatile pressure measuring instrument having digital indication. The readings of the instrument are stored in the internal of EEPROM. The LEO2 Microprocessor reads the values and also calculates the pressure to an accuracy of value less than 0.1 %FS at room temperature.
Applications: Industrial applications, Servicing, Calibration/testing, etc -
₹32,025.00 – ₹50,984.00Keller LEO2-Ei Digital Manometer
Keller LEO2-Ei Digital Manometer are provide high accuracy. The minimum or most value since the last reset can be displayed at a similar time because the current pressure value in a wide variety of units of pressure. The swivel adapter permits the device to be optimally positioned. Power is provided by a conventional CR2430 coin cell battery.
Applications: Industrial Applications, Servicing, Calibration / Testing.
-
Masibus ICAL LC12 Analog Signal Generator
Masibus ICAL LC12 Analog Signal Generator is an ultimate loop calibrator used for sourcing, measuring, and simulating Loop current, mV, and V. It is a compact, rugged, and easy-to-use hand-held device with a graphical user interface. This LC 12 Signal Generator has simultaneous source and sense capability with independent parameter and range selection for source and sense. Masibus LC 12 Loop Calibrator is designed to provide a base accuracy of 0.02% reading in all modes of operation. This LC 12 Signal Generator comes with a Mini USB connector for charging, logged data retrieval, and firmware upgrade.
Applications: Calibration Lab, Process plant, Dairy plant, Cement Industries, Chemical Industries, Paper Industries, Engineering laboratories, Electronics Industries, etc.
-
₹93,366.00Masibus UC12 Universal Calibrator
Masibus UC12 Universal Calibrator is compact, rugged, and easy to use. This Masibus is a handheld device with a graphical user interface for precise measurement and easy sourcing of electrical and physical parameters.
Applications: Drift test of Transmitters, Transducers, laboratory and Site calibration purpose, etc.
-
₹47,850.00Megger TC 3231 Industrial Thermal Camera
Megger TC 3231 Industrial Thermal Camera is a handheld thermal imaging camera designed for use in electrical and mechanical maintenance applications. It features a 160 x 120 pixel thermal sensor, a 2.4-inch color LCD display, and a built-in laser pointer for precise targeting. The camera is capable of measuring temperatures up to 572°F (300°C) and has a temperature measurement accuracy of ±2% or ±2°C, whichever is greater.
Application: locate thermal bridges, identify overheated connections, and Detect mould-prone areas -
₹2,450.00Subzero SZ-7524P Digital Temperature Controller
Subzero SZ-7524P Digital Temperature Controller is an aesthetically superior version of their predecessors. The SZ 7515/25-P is a single setpoint controller with a buzzer.
Applications: Temperature & process indication, Plastics molding/extrusion temperature monitoring, Heat treatment – furnace temperature monitoring, Chillers, Water heating boilers, Oven Control, Pressure/ Level/ Flow Monitoring. -
₹1,185.00 – ₹2,085.00Subzero SZ7510 Temperature Controller
Subzero SZ7510 Temperature Controller is a single setpoint controller with a buzzer. This digital Temperature controller is specifically designed for refrigeration applications wherein the compressor cuts off at a set point and is restarted at a temperature of setpoint plus differential.
Applications Temperature Control System: Heating applications, Refrigeration applications. -
₹2,200.00Subzero SZ7515P Digital Temperature Controller
Subzero SZ7515P Digital Temperature Controller is an aesthetically superior versions of their predecessors. SZ 7515/25-P is a single setpoint controller with a buzzer. SZ 7520/25-P is a defrost controller and 7529-Pis also a defrost controller with an inbuilt power relay which can drive compressor loads directly up to 20Amps, thereby eliminates contactors in single-phase applications. They are specifically designed for refrigeration applications wherein the compressor cuts off at a set point and is restarted at a temperature of setpoint plus differential.
Applications: Chiller Machines, Lab Equipments, Display Cabinets.
-
₹24,283.90Supco DVTH Data View Temperature and Humidity Data Logger
SUPCO 4 Channel Temperature and Humidity Data Logger are used to records and instantly display trends of temperature, humidity, and dewpoint. Monitor real-time measurements, and download over 40,000 data points to your PC.
Applications: Refrigerators/Freezers, Commercial refrigeration, Wine Storage, Medical Storage, Laboratories, Museums, Florists, Greenhouses, MRO, Industrial processes, Variable speed drives, Intermittent electrical problems.
-
₹6,625.42
SUPCO SL300T Mini Data Logger
SUPCO SL300T Mini Data Logger provides concise measurements of temperature for critical environmental conditions. It is widely used in temperature-sensitive goods.
Applications: Refrigerators/Freezers, Commercial Refrigeration Systems, Wine Storage, Medical Storage facilities, Greenhouses, Florists, Museums, Laboratories, MRO, Industrial processes, Variable speed drives, Intermittent electrical problem, etc.
-
Supco SL500 Temperature and Humidity Data Logger
Supco SL500 Temperature and Humidity Data Logger is a small, lightweight, and easy-to-use device that records temperature and humidity data over time. It is ideal for monitoring temperature and humidity in various environments, such as warehouses, factories, and greenhouses. The data logger can be programmed to record data at intervals of 1 second to 9 hours. The data is stored in non-volatile memory, so it will not be lost even if the battery fails. The data can be downloaded to a computer using the included software.
Applications: Warehouses, Greenhouses, Factories.
Translate