• Keller High Temperature Pressure Transmitters Series 35X HTC

    Brand:Keller

    Keller High-Temperature Pressure Transmitters Series 35X HTC  is a device used to measure the piezoresistive high-temperature transmitter that is appropriate for medium temperatures up to 300 °C. This Keller Transmitter is pressed on the flush diaphragm and transmitted through an oil-filled capillary and onto the silicon measuring cell. The Pressure Transmitter’s capillary serves as a cooling spiral, enabling media, temperatures as high as 300 °C. The PROG30 program may be used to read out the electronics’ temperature, which cannot be higher than 120 °C. KELLER provides pressure ports in a variety of materials for very aggressive media.
    Applications: General industrial and OEM applications

  • 30,500.0055,640.00

    Keller LEO2 Digital Pressure Gauge

    Brand:Keller

    Keller LEO2 Digital Pressure Gauge is a compact, Controlled Microprocessor, highly accurate, and versatile pressure measuring instrument having digital indication. The readings of the instrument are stored in the internal of EEPROM. The LEO2 Microprocessor reads the values and also calculates the pressure to an accuracy of value less than 0.1 %FS at room temperature.
    Applications: Industrial applications, Servicing, Calibration/testing, etc

  • 32,025.0050,984.00

    Keller LEO2-Ei Digital Manometer

    Brand:Keller

    Keller LEO2-Ei Digital Manometer are provide high accuracy. The minimum or most value since the last reset can be displayed at a similar time because the current pressure value in a wide variety of units of pressure. The swivel adapter permits the device to be optimally positioned. Power is provided by a conventional CR2430 coin cell battery.

    Applications: Industrial Applications, Servicing, Calibration / Testing.

  • Masibus ICAL LC12 Analog Signal Generator

    Brand:Masibus

    Masibus ICAL LC12 Analog Signal Generator is an ultimate loop calibrator used for sourcing, measuring, and simulating Loop current, mV, and V. It is a compact, rugged, and easy-to-use hand-held device with a graphical user interface. This LC 12 Signal Generator has simultaneous source and sense capability with independent parameter and range selection for source and sense. Masibus LC 12 Loop Calibrator is designed to provide a base accuracy of 0.02% reading in all modes of operation. This LC 12 Signal Generator comes with a Mini USB connector for charging, logged data retrieval, and firmware upgrade.

    Applications: Calibration Lab, Process plant, Dairy plant, Cement Industries, Chemical Industries, Paper Industries, Engineering laboratories, Electronics Industries, etc.

  • 92,430.00

    Masibus UC12 Universal Calibrator

    Brand:Masibus

    Masibus UC12 Universal Calibrator is compact, rugged, and easy to use. This Masibus is a handheld device with a graphical user interface for precise measurement and easy sourcing of electrical and physical parameters.

    Applications: Drift test of Transmitters, Transducers, laboratory and Site calibration purpose, etc.

  • MSR MA-3-2089-X-F Ethylene Analog Transmitter

    Brand:MSR

    MSR Ethylene (C2H4) Analog transmitter is for monitoring of gas and vapors in the ambient air. It is used for cold storage, ripening chamber, refrigerant vehicles, etc. The μ-Gard analog transmitter series MA is a reliable gas detector.

    Applications : industry, agriculture, and other areas requiring precise measurement of ethylene concentration.

  • MSR Sensitron Fixed Acetylene Gas Sensor Transmitter

    Brand:MSR

    MSR Sensitron Fixed Acetylene Gas Sensor Transmitter is a microprocessor-based analog gas transmitter with a 4 – 20 mA output signal for monitoring the ambient air and detecting flammable gases and vapors in the lower explosion level (LEL) by means of a catalytic sensor (pellistor). The calibration for types without LCD display is possible via the handheld calibration keypad XT.S/CKD.

    Applications: Industrial applications.

Main Menu