-
Keller High Temperature Pressure Transmitters Series 35X HTC
Keller High-Temperature Pressure Transmitters Series 35X HTC is a device used to measure the piezoresistive high-temperature transmitter that is appropriate for medium temperatures up to 300 °C. This Keller Transmitter is pressed on the flush diaphragm and transmitted through an oil-filled capillary and onto the silicon measuring cell. The Pressure Transmitter’s capillary serves as a cooling spiral, enabling media, temperatures as high as 300 °C. The PROG30 program may be used to read out the electronics’ temperature, which cannot be higher than 120 °C. KELLER provides pressure ports in a variety of materials for very aggressive media.
Applications: General industrial and OEM applications -
₹30,500.00 – ₹55,640.00
Keller LEO2 Digital Pressure Gauge
Keller LEO2 Digital Pressure Gauge is a compact, Controlled Microprocessor, highly accurate, and versatile pressure measuring instrument having digital indication. The readings of the instrument are stored in the internal of EEPROM. The LEO2 Microprocessor reads the values and also calculates the pressure to an accuracy of value less than 0.1 %FS at room temperature.
Applications: Industrial applications, Servicing, Calibration/testing, etc -
₹32,025.00 – ₹50,984.00Keller LEO2-Ei Digital Manometer
Keller LEO2-Ei Digital Manometer are provide high accuracy. The minimum or most value since the last reset can be displayed at a similar time because the current pressure value in a wide variety of units of pressure. The swivel adapter permits the device to be optimally positioned. Power is provided by a conventional CR2430 coin cell battery.
Applications: Industrial Applications, Servicing, Calibration / Testing.
-
Masibus ICAL LC12 Analog Signal Generator
Masibus ICAL LC12 Analog Signal Generator is an ultimate loop calibrator used for sourcing, measuring, and simulating Loop current, mV, and V. It is a compact, rugged, and easy-to-use hand-held device with a graphical user interface. This LC 12 Signal Generator has simultaneous source and sense capability with independent parameter and range selection for source and sense. Masibus LC 12 Loop Calibrator is designed to provide a base accuracy of 0.02% reading in all modes of operation. This LC 12 Signal Generator comes with a Mini USB connector for charging, logged data retrieval, and firmware upgrade.
Applications: Calibration Lab, Process plant, Dairy plant, Cement Industries, Chemical Industries, Paper Industries, Engineering laboratories, Electronics Industries, etc.
-
₹93,366.00Masibus UC12 Universal Calibrator
Masibus UC12 Universal Calibrator is compact, rugged, and easy to use. This Masibus is a handheld device with a graphical user interface for precise measurement and easy sourcing of electrical and physical parameters.
Applications: Drift test of Transmitters, Transducers, laboratory and Site calibration purpose, etc.
-
₹3,892.00Meco 1008 TRMS Digital AC/DC Clamp Meter
Meco 1008 TRMS Digital AC/DC Clamp Meter is an electrical meter with an integral AC current clamp known as a clamp-on ammeter, or tong tester (analyzer). It determines the True RMS value.
Applications: Electrical and Electronics Industries, Inspection work, Industrial applications, Research laboratories.
-
₹1,946.10Meco 101B+ Autoranging Digital Multimeter
Meco 101B+ Autoranging Digital Multimeter, A Digital Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance. These were used by commercial and residential electricians.
Applications: Testing, Adjust, and troubleshoot electric and electronic circuits, Industrial and Laboratories -
₹5,139.65Meco 1080 TRMS Digital AC/DC Clamp Meter
Meco 1080 TRMS Digital AC/DC Clamp Meter is an electrical meter with an integral AC current clamp. Meco 1080 has a large backlit LCD display, a single 9V battery, and also has an auto-power off function and low battery indication to save power.
Applications: Laboratories and Industrial Applications, Calibration Services. -
₹2,153.81Meco 108B+ Autoranging Digital Multimeter
Meco 108B+ Autoranging Digital Multimeter, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance.
Applications: Testing batteries, household wiring, electric motors, and power supplies.
-
₹2,952.55Meco 171B+ TRMS Digital Multimeter
Meco 171B+ TRMS Digital Multimeter comes with cat-II-rated probes with isolation caps. The additional feature of capacitance in Meco 171B+ makes this multimeter unique to be used in all kinds of industries.
Applications: Industrial applications
-
₹1,470.77
Meco 27-Auto Digital AC Clamp Meter
Meco 27 Auto Digital Clamp Meter has a long working life because of the durable material that has been used in its manufacturing and the smart design which sees that it goes through very little wear and tear. The instrument is irreplaceable for inspection work and maintenance in various industrial applications, in research and development, in residential applications, and in many small businesses or households.
Applications: Inspection work, Industrial applications, Research laboratories
-
₹1,702.12Meco 27T-Auto Digital AC Clamp Meter
Meco 27 Auto Digital Clamp Meter is used to measure AC Voltage, DC Voltage, AC Current, Temperature and Resistance with long working life because of the durable material that has been used in its manufacturing and the smart design which sees that it goes through a very little wear and tear.
Applications: Laboratories and Industrial Applications, Calibration Services,
Translate