-
₹6,155.50
Metravi 19 Super Digital TRMS Multimeter
Metravi 19 Super Digital TRMS Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure AC/DC voltage, AC/DC current, Resistance, Capacitance, Frequency (Electrical and Electronic), Duty Cycle, Diode test, Continuity plus Thermocouple Temperature.
Applications: -
Metravi PRO TI-10P Pocket Thermal Imager
Metravi PRO TI-10P Pocket Thermal Imager is a compact, easy-to-use device that visualizes heat patterns, helping with preventive maintenance, equipment troubleshooting, and more. This Thermal Camera has a wide temperature range, high-resolution images, and various analysis features, the PRO TI-10P helps you see the unseen.
Applications: Predictive maintenance, Building inspections, HVAC/R inspections, Search and rescue, Electrical and mechanical troubleshooting, etc.
-
Metravi CTG-01 Coating Thickness Meter
Metravi CTG-01 Coating Thickness Meter measures the thickness of Non-magnetic coatings (e.g. paint, zinc) on steel and insulating Coatings (e.g. paint, anodizing coatings) on nonferrous metals. This has two different operating modes, such as DIRECT mode is recommended for simple, quick, occasional measurements and GROUP mode permits the measurement and storage of readings in a free programmable memory. The probe system is spring-mounted inside the probe sleeve, guaranteeing steady and secure probe positioning as well as consistent contact pressure.
Applications: Automotive Industry, Aerospace Industry, Manufacturing, Metal Fabrication, Marine Industry, Electronics Industry, Infrastructure Maintenance, Quality Control and Inspection.
-
Metravi DT-2350B Stroboscope
Metravi DT-2350B Stroboscope is a versatile device used to observe and measure the speed and motion of rotating or reciprocating machinery. With adjustable flash rates and high-intensity lighting, it provides precise synchronization, making it ideal for motion analysis and inspection across various industrial applications.
Application: Machinery Inspection, Quality Control, Maintenance and Troubleshooting, Automotive Industry, Textile Industry.
-
Metravi CET-05 Clamp On Ground Resistance Tester
Metravi CET-05 Clamp on Ground Resistance Tester is a state of the art instrument designed to simplify and enhance ground resistance measurements in various electrical systems and installations. The CET-05 is equipped with a clamp-on design, allowing users to measure ground resistance without the need for ground rods or disconnecting the grounding system. This feature makes it exceptionally convenient for both routine maintenance and troubleshooting.
Applications: Electrical Substations, Industrial Plants, Commercial Buildings, Telecommunications Facilities.
-
Metravi WT500 Non-Contact High-Voltage Detector
The Metravi WT500 Non-Contact high-voltage detector serves as a safety companion for electrical workers, gently nudging them to prioritize safety and avert high-voltage electric shock incidents. When the operator dons the device and approaches a high-voltage source within a specific range, it promptly triggers both audible and visual alarms, calibrated to the safety distance corresponding to the voltage level in question. Furthermore, this versatile instrument can double as a tool for identifying line faults and as an electroscope, broadening its utility in the electrical field.
Applications: Electrical Maintenance and Testing, Safety Precautions, Line Fault Detection, Industrial and Manufacturing Settings.
-
Metravi AT500 Non-contact High Voltage Detector (Arm Type)
Metravi AT500 Non-contact High Voltage Detector is a device used to remind the electrical worker to
pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This High Voltage Detector can also be used for line fault
detection and electroscope.Applications: Electrical Installations, Power Distribution Systems, Industrial Machinery, HVAC Systems, Renewable Energy Systems, and Safety Inspections etc.
-
Metravi CTG-02 Coating Thickness Gauge
Metravi CTG-02 Coating thickness gauge is suitable for laboratory, Workshop and Outdoor use. This probe can work on both principles, Magnetic Induction and on the eddy current principle. one probe is required for coating measurement both on ferrous and non-ferrous metal substrates.
Applications: Paint shops, Automobile, Ship building, Aircraft industries.
-
Masibus ICAL LC12 Analog Signal Generator
Masibus ICAL LC12 Analog Signal Generator is an ultimate loop calibrator used for sourcing, measuring, and simulating Loop current, mV, and V. It is a compact, rugged, and easy-to-use hand-held device with a graphical user interface. This LC 12 Signal Generator has simultaneous source and sense capability with independent parameter and range selection for source and sense. Masibus LC 12 Loop Calibrator is designed to provide a base accuracy of 0.02% reading in all modes of operation. This LC 12 Signal Generator comes with a Mini USB connector for charging, logged data retrieval, and firmware upgrade.
Applications: Calibration Lab, Process plant, Dairy plant, Cement Industries, Chemical Industries, Paper Industries, Engineering laboratories, Electronics Industries, etc.
-
₹3,435.00
Metravi GD-09-1M Combustible Gas Detector and Alarm
Metravi GD-09-1M Combustible Gas Detector is a device used to detect combustible gas (like LPG) leaks. This combustible gas detector has a high-quality sensor. It helps the user to detect a gas leak at premises where a gas leak can occur. This combustible gas detector device has an alarm with a red flashing light when the gas levels reach the alarm set point. This gas detector alerts the user to take necessary precautions for hazardous situations.
Applications: households, hotels, shopping malls, cafes, industrial kitchens, offices, canteens, etc.
-
₹5,480.00
Metravi 1333 Digital Lux Meter
Metravi 1333 Digital Lux Meter is a portable device used to measure the luminous flux per unit area with the help of a photodetector filter of one silicon photo diode and spectral response. It has a large LCD backlit display which helps the users to read easy
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹3,010.00
Metravi 1330 Digital Lux Meter
Metravi 1330 Digital Lux Meter is a device used to measure the amount of light present in workplaces. This digital light meter has an LCD with a low battery indication in it. It is easy to use with single function switch operating, lightweight, and pocket friendly
Applications: offices, factories, hotels, hospitals, schools, etc.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters