-
₹1,994.07Mean Well 100W Single Output Switching Power Supply
Mean Well LRS-100 series is a 100W single-output enclosed compose power supply with 30mm of low profile outline. Adopting the full range 85-264 VAC input, the whole arrangement gives an output voltage line of 3,3V,5V,12V,15V,24V,36V and 48V.
Applications:
• Industrial robotization hardware.
• Industrial control framework.
• Mechanical and electrical hardware.
• Electronic instruments, types of gear or mechanical assembly.
• Household applications.
-
₹2,379.66
Mean Well 350W Single Output Switching Power Supply
Mean Well 350W Single Output Switching Power Supply arrangement is a 350W single-output enclosed compose control supply with 30mm of low profile plan. Receiving the contribution of 115VAC or 230VAC selected by the switch, the whole arrangement gives a yield voltage line of 3,3V,5V,12V,15V,24V,36V, and 48V.
Applications: Industrial robotization hardware, Industrial control framework, Mechanical and electrical hardware, Electronic instruments, hardware’s or contraption
-
₹3,010.00Metravi 1330 Digital Lux Meter
Metravi 1330 Digital Lux Meter is a device used to measure the amount of light present in workplaces. This digital light meter has an LCD with a low battery indication in it. It is easy to use with single function switch operating, lightweight, and pocket friendly
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹5,480.00Metravi 1333 Digital Lux Meter
Metravi 1333 Digital Lux Meter is a portable device used to measure the luminous flux per unit area with the help of a photodetector filter of one silicon photo diode and spectral response. It has a large LCD backlit display which helps the users to read easy
Applications: offices, factories, hotels, hospitals, schools, etc.
-
₹6,155.50Metravi 19 Super Digital TRMS Multimeter
Metravi 19 Super Digital TRMS Multimeter or a Multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure AC/DC voltage, AC/DC current, Resistance, Capacitance, Frequency (Electrical and Electronic), Duty Cycle, Diode test, Continuity plus Thermocouple Temperature.
Applications: -
Metravi AT500 Non-contact High Voltage Detector (Arm Type)
Metravi AT500 Non-contact High Voltage Detector is a device used to remind the electrical worker to
pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This High Voltage Detector can also be used for line fault
detection and electroscope.Applications: Electrical Installations, Power Distribution Systems, Industrial Machinery, HVAC Systems, Renewable Energy Systems, and Safety Inspections etc.
-
Metravi AVD-80 Portable Vibration Meter
Metravi AVD-80 Portable Vibration Meter is a digital vibration meter. The device is simply a pocket-sized and lightweight device, and it has a backlight display. and an automatic option for power ON/OFF. Low battery warning with text. Pocket-sized and light. It measures velocity, acceleration, and displacement. suitable for monitoring machinery vibration caused by imbalance, misalignment, and gear faults. microcontroller based.
Applications: Predictive Maintenance, Machinery Condition Monitoring, Quality Control, Shaft Alignment, Unbalance Detection.
-
₹6,175.00
Metravi CAL 400-3 Digital Milli Volt Milli Amp Calibrator
Metravi CAL 400-3 Digital Milli Volt Milli Amp Calibrator is a portable instrument for Calibrating process devices and measuring Process signals. This Milli Amp Calibrator Powers or measures a two-wire Current loop. Four functions provide the quality and accuracy of the Hand-Held Calibrator.
Applications: Machine building, Shipbuilding, Measurement, and Control Technology, Hydraulics and Pneumatics, Pumps and Compressors, etc.
-
Metravi CET-05 Clamp On Ground Resistance Tester
Metravi CET-05 Clamp on Ground Resistance Tester is a state of the art instrument designed to simplify and enhance ground resistance measurements in various electrical systems and installations. The CET-05 is equipped with a clamp-on design, allowing users to measure ground resistance without the need for ground rods or disconnecting the grounding system. This feature makes it exceptionally convenient for both routine maintenance and troubleshooting.
Applications: Electrical Substations, Industrial Plants, Commercial Buildings, Telecommunications Facilities.
-
Metravi CTG-01 Coating Thickness Meter
Metravi CTG-01 Coating Thickness Meter measures the thickness of Non-magnetic coatings (e.g. paint, zinc) on steel and insulating Coatings (e.g. paint, anodizing coatings) on nonferrous metals. This has two different operating modes, such as DIRECT mode is recommended for simple, quick, occasional measurements and GROUP mode permits the measurement and storage of readings in a free programmable memory. The probe system is spring-mounted inside the probe sleeve, guaranteeing steady and secure probe positioning as well as consistent contact pressure.
Applications: Automotive Industry, Aerospace Industry, Manufacturing, Metal Fabrication, Marine Industry, Electronics Industry, Infrastructure Maintenance, Quality Control and Inspection.
-
Metravi CTG-02 Coating Thickness Gauge
Metravi CTG-02 Coating thickness gauge is suitable for laboratory, Workshop and Outdoor use. This probe can work on both principles, Magnetic Induction and on the eddy current principle. one probe is required for coating measurement both on ferrous and non-ferrous metal substrates.
Applications: Paint shops, Automobile, Ship building, Aircraft industries.
-
Metravi DT-2350B Stroboscope
Metravi DT-2350B Stroboscope is a versatile device used to observe and measure the speed and motion of rotating or reciprocating machinery. With adjustable flash rates and high-intensity lighting, it provides precise synchronization, making it ideal for motion analysis and inspection across various industrial applications.
Application: Machinery Inspection, Quality Control, Maintenance and Troubleshooting, Automotive Industry, Textile Industry.
Shop By Category
- Clean Room Instruments
- Indicators & Controllers
- Data Loggers
- Radiation Detectors
- Smart Monitors
- Flameproof Instruments
- Portable Instruments
- Calibrators
- HVAC / Air Flow Instruments
- Air Quality Monitors
- Gas Detectors
- Particle Counters
- Fire and Safety
- Environmental Meters